3 – Configuration
27
Caution
Closing the browser without clicking SAVE will cause the entered data to be lost, and your firewall will remain in default configuration. You will need to
information.
2)Once you have completed the network configuration, apply the changes by clicking SAVE. The firewall will then join the assigned network. Close your browser.
Caution
Failure to close the browser may allow unauthorized access to the firewall. To prevent this, always log out and close your browser after a firewall administration session.
Note
If you changed the IP of NIC 0’s protected network, the firewall will now be on a different logical network than your computer, and you will not be able to access the firewall from your computer. You must restore your computer’s original network settings to access the firewall again.