Kodak i60, i50 manual Scanning your documents, Loading documents, Using the ADF, Using the flatbed

Scanning your documents

Loading documents

Using the ADF

Make sure that the scanner is on and has completed its self-test before you turn on the PC to begin scanning. See the section entitled “Scanning specifications” for information about the sizes and types of documents that you can scan.

Use the ADF to feed multiple documents automatically in a batch.

1.Fan documents before loading to prevent paper jams.

2.Place the documents face down under the balance wire in the ADF tray, with the leading edges in the auto feeder entrance.

3.Adjust the left and right guides until they are snug against the document sides.

Original document

ADF tray

Left guide

Right guide

Balance wire

Using the flatbed	Use the flatbed to scan documents that cannot be scanned using the ADF.
	1.	Place the document face down on the glass platen.
	2.	Position the document with the upper right corner aligned with the reference mark.

Document cover

Reference mark

Original document

Glass platen

Reference frame

A-61182 October 2001 11