GarrettCom manual DIN-Rail Mounting the Magnum 6KQE

Magnum 6KQE Managed Edge Switch Installation and User Guide 02/09

The unit is mounted using the brackets as shown in the illustration above. The spacing for the mounting screws into the supporting wall or panel is a rectangle 21.74 x 11.91 cm (8.56 x 4.69 inches) center-to-center.

3.3.1DIN-Rail Mounting the Magnum 6KQE

The Magnum 6KQE is designed for use in a “factory floor” industrial environment. It is available with an optional DIN-Rail bracket to mount it securely in a

metal factory floor enclosure, maintained vertically for proper convection cooling of the unit. The Magnum 6KQE requires one DIN- Rail bracket for secure mounting. This may be ordered as Model # DIN-RAIL-6KQ. See a 6KQE viewed from the side, at the rear, with model DIN-RAIL-6KQ in place on the unit.

The DIN Rail bracket is mounted on one of three available positions at the rear of the 6KQE unit. Eight threaded holes are provided on the rear of 6KQE for DIN-Rail mounting purposes. The required four screws are included with the DIN-Rail bracket, and are no.4-40 X 5/16 PHIL. PAN Head.

To install the 6KQE with the DIN-Rail bracket installed, hold the 6KQE in the side

www . GarrettCom . com

21