GarrettCom manual Powering the Magnum 6KQE Managed Edge Switch

Magnum 6KQE Managed Edge Switch Installation and User Guide 02/09

vertical position with the bottom out, and with the top moved in toward the DIN-Rail. Position the DIN bracket over the top of the DIN-Rail. Then, snap the bracket into holding position by moving the bottom of the 6KQE inwards to a vertical position. The DIN-Rail bracket is heavy duty, and will hold the 6KQE securely in position, even with cabling attached to the unit.

To release the 6KQE from the DIN-Rail mounting, press the top of the DIN-Rail bracket slide DOWN to release the 6KQE so that it can be dismounted by pulling the bottom out. Once the bottom of the 6KQE is rotated out, the DIN-Rail bracket is not engaged and the 6KQE can be moved up and out, free of the DIN-Rail mounting.

The DIN-Rail mounting bracket is optional and needs to be ordered as separate items, e.g Model # DIN-RAIL-6KQ

3.4Powering the Magnum 6KQE Managed Edge Switch

The DC internal power supply supports installation environments where the DC voltage is from 10 to 300 volts depending on the model selected. The power consumption will range from about 15 up to 20 watts, depending on the port quantity and types in the configuration.. When connecting the Ethernet cabling, there is no need to power down the unit. Individual cable segments can be connected or disconnected without concern for power-related problems or damage to the unit.

Power input options are available to suit the 6KQE Switches to special high- availability communications and/or heavy industrial-grade applications, including:

*12VDC, -48VDC, 24VDC, 125VDC and 250VDC with single DC input,

*12VDC, -48VDC, 24VDC, 125VDC and 250VDC with dual-source DC input

*AC input with internal power supply

(see Section 1.2, for Ordering Information)

www . GarrettCom . com

22