GarrettCom manual Connecting the Console Terminal to Magnum 6KQE, Pin Signal Description

Page 29

Magnum 6KQE Managed Edge Switch Installation and User Guide

02/09

3.6Connecting the Console Terminal to Magnum 6KQE

Use a (DB-9) “null modem” cable to connect the Magnum 6KQE Console Port (the RS-232 port on the 6KQE Switch) to your PC, so that your PC becomes the 6KQE Console Terminal.

Note: The DB-9 cable is not included with the 6KQE package.

Note: For a detailed description of Managed Network Software (MNS-6K) and Magnum 6KQE Switch configuration for Network Management, please refer to Magnum 6K Software Manual available on GarrettCom‘s FTP site.

Also available on GCI website at:

http://www.garrettcom.com/techsupport/sw_downloads.htm

3.6.1RS-232 (DB-9) Console port (Serial port) pin assignments

DB-9 (Console port connector)

Pin

Signal

Description

 

 

 

1

DCD

Data Carrier detect (not used)

2

RXD

Receive Data (input)

3

TXD

Transmit Data (output)

4

open

not used

5

GND

Signal Ground

6

open

not used

7

RTS

Request to Send

8

CTS

Clear to Send

9

open

not used

The above provided information enables a managed station (a PC or Console terminal) to connect directly to the switch using a straight through cable.

Note: To use the Console port to configure the managed switch, a serial (Null-modem) female to female cable is required to communicate properly. The Null-Modem (DB-9) cable is optional and can be ordered from the factory, along with the unit as- CONSOLE CBL for serial port

CONSOLE USB for USB port

www . GarrettCom . com

24

Image 29
Contents Managed Edge Switch Contacting GarrettCom, Inc GarrettCom, IncCanadian Emissions Statement Electrical Safety requirementsIntroduction Table of ContentsAppendix B DC Power Input TroubleshootingPerformance Technical SpecificationsNetwork Standards and Compliance, hardware Maximum 10 Mbps Ethernet Segment LengthsFiber Single-mode connector types Fiber Multi-mode connector types supportedAlarm Relay Contacts Management Console connectorPower Consumption AC Power Supply InternalDual DC Power Input Optional 6KQE MountingOrdering Information Configuration OptionsWww . GarrettCom . com Inspecting the Package and Product Product Description Magnum 6KQE Managed Edge Switch Packet Prioritization, 802.1p QOS Frame Buffering and Flow Control Web-browser, at ftp//ftp.garrettcom.com Managed Network Software for Magnum 6KQE„ Managed switching for high performance Ethernet LANs Features and Benefits„ Fiber Ports Built-In „ MNS-6K-SECURE optional, for extra securityApplications 5a The industrial factory floor application with Magnum 6KQE Example 1 Magnum 6KQE Switch for an Industrial ApplicationMagnum 6KQE Managed Edge Switch Installation and User Guide Www . GarrettCom . com Locating Magnum 6KQE Switches Media Ieee Standard Connector Connecting Ethernet MediaConnecting Twisted Pair CAT3, CAT5, UTP or STP Connecting Single-Mode Fiber Optic Connecting Twisted Pair CAT5e or better, UTP or STPSee .2 for the SFP’s available for the 6KQE Connecting Fiber Optic Cable to SFP TransceiversGigabit SFP Small Form-factor Pluggable Transceivers Mounting Dimensions for 6KQE with metal brackets DIN-Rail Mounting the Magnum 6KQE Powering the Magnum 6KQE Managed Edge Switch 5a Alarm Contacts Pin Signal Description Connecting the Console Terminal to Magnum 6KQEDB-9 Console port connector 1 RS-232 DB-9 Console port Serial port pin assignmentsAddress Learning Switching FunctionalityFiltering and Forwarding Auto-CrossMDIX and Auto-negotiation, for RJ-45 ports Flow-control, Ieee 802.3x standard 6KQE Modules Power Budget Calculations for 6KQE Modules with Fiber MediaMagnum 6KQE Managed Edge Switch Port Modules 1 6KQE Module LED designations 3 6KQE4-RJ45, 4 x 10/100Mb RJ45 Slot C 2 6KQE Base Unit LED designations6KQE4-1MMRJ, 1 x Mtrj / 3 x RJ45 Slot C 6 6KQE4-3MMRJ, 3 x Mtrj / 1 x RJ45 Slot A, Slot C 5 6KQE4-2MMRJ, 2 x Mtrj / 2 x RJ45 Slot C6KQE4-1MLC, 1 x LC / 3 x RJ45 Slot C 9 6KQE4-3MLC, 3 x LC / 1 x RJ45 Slot A, Slot C 8 6KQE4-2MLC, 2 x LC / 2 x RJ45 Slot C10 6KQE4-xSLC, LC Singlemode 20km / RJ45 Module 11 6KQF-xSLCL, LC Singlemode 40km / RJ45 Module13 6KQE-2GSFP, 1GSFP Gigabit SFP Fiber ports Slot D 12 6KQE-2GCU, 1GCU Gigabit RJ45 Copper ports Slot DPoE LEDs Summary 6KQEP-48VDC, Base Unit w/PoE Power-pass-throughBefore Calling for Assistance When Calling for AssistanceNo Problem Found Return Material Authorization RMA ProcedureShipping and Packaging Information B2.0 12, 24, -48, 125 and 250VDC POWER, Theory of Operation Fig B1.0 Location of chassis ground Power ConsumptionStandard 6KQE DC Power Input Terminal Block -, GND, + B4.0 6KQE, 12, 24, -48, 125 and 250VDC Installation B3.0 Applications for DC Powered Ethernet SwitchesB5.0 Operation B4.1 UL Requirements for DC-powered unitsC2.0 Magnum 6KQE, with DC Dual-Source option Appendix C Internal DC Dual-Source Power Input OptionC3.0 DUAL-SOURCE OPTION, Theory of Operation Example Magnum 6KQE-48VDC Dual-Src-48V C6.0 Ordering Information for Dual Source Power