QUICKSTART GUIDE
QS.4.1 Hardware Overview
The 2S and 2T managed Switch modules provide two 10/100 BaseT and four
ST 100 base Fx external Ethernet ports in addition to a serial console port.
2 x 10/100BaseT Ports
4 x 100Mb FX multimode ports with ST connectors
Independent Power Supply
Options: 2S - HI P/S
2T - LO P/S
FIGURE QS–7: Rear View Showing I/O Ports
Table QS–8: Console Port Pin Assignment
Pin | Signal | Description |
|
|
|
1 | CD | Carrier Detect (not used) |
|
|
|
2 | RXD | Receive Data (input) |
|
|
|
3 | TXD | Transmit Data (output) |
|
|
|
4 | open | not used |
|
|
|
5 | GND | Signal Ground |
|
|
|
6 to 9 | open | not used |
|
|
|
FIGURE QS–9: Front View Showing Console Port
QS.4.2 2S and 2T LED indicators
The function of the 2S and 2T Switch modules LED indicators is as shown below.
Copper ports have 3 LEDs indicating:
1.10 or 100 MB
2.Full or Half Duplex
3.Linkup and Activity
Fiber Ports have 1 LED indicating:
1.Linkup and Activity
UR SWITCH MODULE – QUICKSTART GUIDE |