QUICKSTART GUIDE
If you have successfully logged in you will be presented with a graphic of the particular
Switch to which you are connected.
QS.4.8 Self-test Errors and Meaning
NOTE
Be sure to enable the Ethernet Switch Fail function under Product Setup > User- Programmable
Activation Setting (set to | Event Name | Event Cause |
| Possible Causes | |
"Enabled") |
|
|
|
| |
|
|
|
| ||
|
|
| • Loss of Switch power | ||
|
|
| • | IP/Gateway/Subnet | |
|
|
|
| incompatibility between | |
|
| No response has been |
| the CPU and the Switch | |
|
|
| module. | ||
ETHERNET SWITCH FAIL | ETHERNET | received from the | • | UR Port (Port 7) being | |
Ethernet module after 5 | |||||
FUNCTION | MODULE OFFLINE |
| configured wrongly/ | ||
successive polling |
| ||||
|
|
| blocked | ||
|
| attempts. |
| ||
|
|
| • | Switch IP Address | |
|
|
|
| assigned to another | |
|
|
|
| device in the same | |
|
|
|
| network. | |
|
|
|
|
| |
|
| An active Ethernet port | • | Ethernet connection | |
| ETHERNET PORT n |
| broken. | ||
PORT n EVENTS | has returned a “Failed” |
| |||
OFFLINE | • | An inactive port’s events | |||
| status. | ||||
|
|
| have been enabled. | ||
|
|
|
| ||
|
|
|
|
| |
UR SWITCH MODULE – QUICKSTART GUIDE |