GE QS24 UR quick start QS.4.3 Hardware Installation, T60 Transformer Management Relay

QUICKSTART GUIDE

ON = Link Active	ON = 100Mbps
Flashing LED = Activity	OFF = 10 Mbps
ON = Link Active	ON = Full Duplex
Flashing LED = Activity
	OFF = Half Duplex

FIGURE QS–10: LED Functions

QS.4.3 Hardware Installation

With power removed, the Switch module is mounted into slot W and is then connected to a suitable source of external power via the connector located on the back of the module.

T60 Transformer Management Relay	RATINGS:		Model:	T60D00HCHF8AH6AM6BP8BX7A
	Contact Inputs:	300V DC Max 10mA	Mods:	000
			Inst. Manual:	D
	Control Power:	88-300V DC @ 35W / 77-265V AC @ 35VA	Wiring Diagram: ZZZZZZ
	Contact Outputs: Standard Pilot Duty / 250V AC 7.5A		Serial Number:	MAZB98000029
GE Power Management		360V A Resistive / 125V DC Break	Firmware:	D
		4A @ L/R = 40mS / 300W	Mfg. Date:	1998/01/05

					Technical Support:									Made in
					Tel: (905) 294-6222		http://www.ge.com/indsys/pm					®
												®		Canada
					Fax: (905) 201-2098										- M	A	A B 9		7	0 0	0	0	9	9	-
X	W	V	U	T	S	R		P	N		M	L	K	J	H			G					F			D	B
	c	b	a			c	b	a	c	b	a		c	b	a		c			b		a
																									b	a	b	a
																									1		1
																										1		1
																									2		2
																										2		2
																									3		3
																										3		3
																									4		4
																										4		4
																									5		5
																										5		5
																									6		6
																										6		6
																									7		7
																										7		7
																									8		8
																										8		8

FIGURE QS–11: Rear view of UR chassis

-= Neutral or negative

+ = Line or positive = Ground

QS–16 UR SWITCH MODULE – QUICKSTART GUIDE