GE GEK 106168E manual Menu Tree, Set, Inf, Act, Ent

8. KEYBOARD AND DISPLAY

8.1. MENU TREE.

The DBF has different menus divided into levels. The Level 0 is the steady state screen. The Level 1 of the different menus is accessed by pressing the corresponding group key (SET, INF, etc.). The scrolling within a given level is done by using the UP and DOWN arrows. It is possible to go down to levels 2 and 3 by pressing the ENT key. Press CLR to go up a level within the menu tree. The Level 1 for each of the five groups is shown in the following table :

Group	Level 1	Description
SET	VIEW SETTINGS	View settings
	CHANGE SETTINGS	Change settings
	CHANGE COUNTER	Change counters
INF	STATUS	Shows the status of the relay
ACT	SET DATE/TIME	Change date and time
	TRIGGERING	Triggers the oscillography
	Ia	Ia current in primary Amps
	In	In current in primary Amps
	I2t A COUNTER	Accumulated kA2 sec. for phase A
	Nº OPENINGS	Accumulated number opens
	3/2-Phase Logic	Shows logic for 50BF High Set.
ENT	50BF Pickup	Shows status of 50BF
	Relay ON/OFF	Relay ON/OF condition
	52A Status	Breaker Pole A (open/closed)
	52B Status	Breaker Pole B (open/closed)
	52C Status	Breaker Pole C (open/closed)
	LATCHING RELAY 1 Status	Latching Relay 1 (open/closed)
	LATCHING RELAY 2 Status	Latching Relay 2 (open/closed)
	DATE & TIME	Shows date and time
	NETWORK SPEED	PORT3 (remote) comm. Speed
this	NETWORK STOP BITS	PORT3 (remote) Stop bits
	LOCAL SPEED	PORT1&2 (local) comm. Speed
menu, typing code: 7169
	LOCAL STOP BITS	PORT1&2 (local) Stop bits
	LOCAL SETTINGS	Local settings change allowed
	REMOTE SETTINGS	Remote settings change allowed
	LOCAL OPERATION A	Local operations allowed
	REMOTE OPERATIONS	Remote operations allowed
Hidden
	UNIT NUMBER	Number of the unit
	PASSWORD	View/Change comm. Password
	t TIME-OUT	Max. t between 2 synch signals (only for
		relays in DDS integrated systems)

42 DBF Breaker Failure Protection GEK-106168E