Enterasys Networks manual DFE Module Specifications, Table A-1 7H4385-49 Specifications

A

Specifications

This appendix provides information about the following:

For information about...	Refer to page...
DFE Module Specifications	A-1
COM Port Pinout Assignments	A-2
Regulatory Compliance	A-3

Enterasys Networks reserves the right to change the specifications at any time without notice.

DFE Module Specifications

Table A‐1 provides the Input/Output ports, processors and memory, physical, and environmental module specifications for the 7H4385‐49 DFE module.

Table A-1 7H4385-49 Specifications

Item	Specification
Ports 1 through 48	Forty-eight, 10BASE-T/100BASE-TX ports by way of RJ45
	connectors. These ports also support PoE operation.
Option Slot	Supports one optional NEM.
Optional Power Input	48 Vdc, 20 A Maximum power input connection from an
	Enterasys Matrix N-POE Power System.
Processors/Memory
Processor	MPC750CX, 400 MHz processor
Dynamic Random Access Memory	256 MB
(DRAM)
FLASH Memory	32 MB

‡FE-Platinum Series Hardware Installation Guide A-1