Management
Management
Management of the module can be either in‐band or out‐of‐band. In‐band remote management is possible using Telnet, Enterasys Networks’ NetSight® management application, or the WebView application. Out‐of‐band management is provided through the DB9 Console port connector on the front panel using a VT100 terminal or a VT100 terminal emulator.
Switch Configuration Using WebView
Enterasys Networks’ HTTP‐based Web management application (WebView) is an intuitive web tool for simple management tasks.
Switch Configuration Using CLI Commands
The CLI commands enable you to perform more complete SecureStack A2 configuration management tasks.
For CLI command set information and how to configure the module, refer to the SecureStack A2 Configuration Guide.
Standards Compatibility
The 100BASE‐T ports are compliant with the following standards and operations:
•IEEE 802.3
•IEEE 802.3u
•IEEE 802.3ab (Stack Ports)
•IEEE 802.3ad
•IEEE 802.3af
•Full‐Duplex operation
In addition to the above standards, the SFP ports are compliant with the following standards and operations:
•IEEE 802.3z
•IEEE 802.3x Flow Control support for Full‐Duplex mode
•Auto‐negotiation for Full‐Duplex control operations