Console Port Pinout Assignments
MGBIC-02 Specifications (1000BASE-T)
Table A-12 MGBIC-02 Specifications
Item | Specification |
|
|
Supported Cable: |
|
Type | Copper, Category 5 UTP |
Maximum Length | Up to 100 meters |
|
|
Connector | RJ45 |
|
|
Data Rate | 1 Gbps, IEEE 802.3:2000 compatible |
| |
| Automatic crossover detection |
|
|
TX Output impedance | 100 ohms, typical at all frequencies between 1 MHz and 125 MHz |
|
|
RX Input impedance | 100 ohms, typical at all frequencies between 1 MHz and 125 MHz |
|
|
Console Port Pinout Assignments
The Console port is a DB9 serial communications port for local access to Local
Management. Refer to Figure A‐1 for the Console port pin assignments.
Figure A-1 Console Port Pinout Assignments
3
|
| 5 | 9 |
| 2 |
| |
|
|
| |
| 1 | 1 | 6 |
1 | Pin 2, Received Data (input) |
| 3 Pin 5, Signal Ground |
2 | Pin 3, Transmitted Data (output) |
| All other pins not connected. |
SecureStack A2 PoE Installation Guide