Enterasys Networks ELS10-27TX manual Configuring Vlans Using Snmp, Vlan MIB Objects

Contents

	2.5.2 Route Command		2-6
	2.5.3 Port Command		2-7
	2.5.4 Switch Command		2-9
	2.5.5 Trap Control Command		2-10
	2.5.6 VLAN Command		2-11
CHAPTER 3 CONFIGURING VLANS USING SNMP
3.1	Overview		3-1
3.2	The Config Table		3-1
	3.2.1 Modifying, Creating and Deleting VLANs		3-2
	3.2.1.1 Modifying a VLAN		3-2
	3.2.1.2 Creating a VLAN		3-3
	3.2.1.3 Deleting a VLAN		3-3
3.3	The Config Egress List		3-4
	3.3.1 Modifying a Config Egress List Entry		3-5
3.4	The Filter GVRP table		3-6
	3.4.1 Modifying, Creating or Deleting a Filter GVRP Table Entry		3-6
	3.4.1.1	Creating a Filter	3-7
	3.4.1.2	Deleting a Filter	3-7
3.5	The Static MAC Entry		3-8
	3.5.1 Creating a Static MAC Entry		3-8
	3.5.2 Deleting a Static MAC Entry		3-8
CHAPTER 4 VLAN MIB OBJECTS
4.1	Overview		4-1
4.2	Bridge Configuration		4-1
	4.2.1 VLAN Version Number		4-1
	4.2.2 Operating Mode (VlanOperatingMode)		4-2
	4.2.3 Reset (VlanReset)		4-2
	4.2.4 GVRP Enable (VlanGVRPEnable)		4-3
	4.2.5 Access List (VlanAccessList)		4-4
	4.2.6 VLAN (VlanConfigVlan)		4-4
4.3	Configuration Entries		4-5
	4.3.1 Entry (VlanConfigEntry)		4-5
	4.3.1.1	VlanConfigEntry	4-5
	4.3.2 Index (VlanConfigIndex)		4-6
	4.3.3 VID (VlanConfigVID)		4-6
	4.3.4 Ports (VlanConfigPorts)		4-7
	4.3.5 IP (VlanConfigIP)		4-7
	4.3.6 IP Mask (VlanConfigIPMask)		4-8

xii