Configuring Workgroups Using LCM
5.2 WORKGROUP CONFIGURATION EXAMPLES
Figure 5-1 shows an example of a typical Workgroup configuration. In this example, two Workgroups are used: Workgroup Alpha and the Default Workgroup. Workgroup Alpha contains ports 3,5,7 and 9, and the Default Workgroup contains all ports not contained in Workgroup Alpha.
NOTES |
1. The system creates the Default Workgroup.
2.If Workgroups were not defined, all ports are members of the Default Workgroup.
Figure 5-1. Traffic Within Workgroups
Workgroup Alpha | Workgroup Default |
Ports 3, 5, 7, 9 | Ports 1, 2, 4, 6, 8, and 10 - 27 |
In this example, all broadcast, multicast, and unicast packets will be restricted to the Workgroups.