Digicom ED-20 PPP installation manual Safety, Approvals, General, Installation

Page 3

1. Safety

!

General:

Before using this unit, read this manual completely and gather all information on

 

 

the unit. Make sure that you understand it fully. Check that your application does

 

not exceed the safe operating specifications for this unit.

!

!

Before installation, maintenance or modification work:

Prevent damage to internal electronics from electrostatic discharges (ESD) by discharging your body to a grounding point (e.g. use of wrist strap).

Prevent access to hazardous voltages by disconnecting the unit from AC/DC mains supply and all other electrical connections.

Installation:

This unit should only be installed by qualified personnel.

This unit should only be installed in a “restricted access area”, for example a lockable cabinet where access is restricted to service personnel only.

This unit is intended for permanent connection to the AC/DC mains supply.

The power supply wiring must be sufficiently fused, and if necessary it must be possible to disconnect manually from the AC/DC mains supply. Ensure compliance to national installation regulations.

Unit with the rated voltage exceeding 42.4 V peak or 60 VDC, is defined as class I equipment with a protective earthing conductor terminal.

Unit with the rated voltage up to 42.4 V peak or 60 VDC, is defined as class III equipment and shall be separated from hazardous voltage by double or reinforced insulation.

This unit uses convection cooling.To avoid obstructing the air flow around the unit, follow the spacing recommendations (see under chapter Installation).

2. Approvals

Conformity with the Directive 89/339/EEC (Electromagnetic compatibility)

has been assessed by application of standards EN 61000-6-2 (industrial immunity) and EN 61000-6-4 (industrial emission).

6609-2221

3

Image 3
Contents 6609-2221 PPPContents Approvals SafetyBefore installation, maintenance or modification work InstallationDeclaration of Conformity Declaration of conformityIntroduction Specification Application ConfigurationIndicators LED Transient ProtectionMaintenance InstallationMounting /Removal Connections Out Transmitted DataReceived Data CH2 RS-232 Connections, DCE CH1 RS-232 Connections, DCETransmitted Data incoming serial data LED Indicators From left to rightPower ED-20 working modeFactory settings DIP Switch SettingsDIP Swiches is not used in this product, leave as it is Minimum Installation of ED-Tool for ED-20MAC address System RequirementsNetwork interfaces Application modeFunctional description About PPPFirewall function Configuration modePPP connection Brouter functionProgram Start ConfigurationConfiguration by ED-Tool for ED-20 Typical configuration proceduresSelects type of connection, Serial or over the Network ED-Tool for ED-20 commandsGeneral commands Serial Interface Channel 1 specific commandsModem Settings Modem Connect Dial Out Modem AT-Commands16 17 18 Modem Init Modem HangupPPP Network Interface Network SettingsLogin Password Set the login passwordBrouter Settings Brouter ModeBrouter Settings IP Address Firewall SettingsFirewall Mode Firewall SettingsAllowed values Default 57 600 bit/sAllowed values None, RTS/CTS Default RTS/CTS Allowed values LL, Pstn Default PstnDCD Control Allowed values NO,YES Default noDial IN/OUT Connect at PWR onDefault AT&F&D0S0=0&K3+MS=V34&W Default +++Default 2 seconds Allowed values, 0, 1 to Default 0 function disabledDefault ATH Default ConnectDefault Ring Username Default ATAAllowed values Default Allowed values NONE, PAP, Chap Default NoneSubnet Mask 0.0126.0.0.0 128.1.0.0 192.0.1.0 DefaultLocal IP Remote addressFirewall Settings IP Address Refer to .2.2 General Modem settings and Dial IN/OUTDefault Off Brouter Settings IP AddressLAN LAN Leased Line Example of application with IP address settingsApplication examples Remote connection LAN DialLAN LAN PSTN, Brouter, Firewall T03-03766609-222103.06 Mälartryck AB, Eskilstuna, Sweden

ED-20 PPP specifications

The Digicom ED-20 PPP is a sophisticated and versatile device designed to provide seamless communication solutions for both personal and professional use. As a cutting-edge platform for Point-to-Point Protocol (PPP), the ED-20 facilitates efficient data transmission over various communication networks, enhancing connectivity while ensuring security and reliability.

One of the main features of the Digicom ED-20 PPP is its robust support for multiple network technologies, including ISDN, dial-up, and broadband connections. This flexibility allows users to connect seamlessly to the internet or private networks, adapting to various scenarios and ensuring that they remain connected regardless of the circumstances. The ED-20's capability to support diverse communication methods makes it an ideal choice for businesses and individuals who require reliable data access.

The ED-20 excels in providing efficient data compression and error correction mechanisms. By employing advanced algorithms, it minimizes data payloads and enhances the speed of transmission. This feature is particularly beneficial for environments with limited bandwidth, as it allows users to optimize their data usage without sacrificing performance. The device’s ability to maintain high-speed communication even in challenging conditions highlights its technological prowess and adaptability.

Another hallmark of the Digicom ED-20 PPP is its easy-to-use interface and setup process. Designed with user experience in mind, the device requires minimal technical knowledge to configure and operate. This user-friendly approach ensures that even those unfamiliar with network technologies can benefit from its advanced features without a steep learning curve.

Security is paramount in today’s digital landscape, and the ED-20 PPP incorporates multiple security protocols to safeguard data transmission. By utilizing encryption and authentication techniques, the device ensures that sensitive information remains protected during transfer, making it an indispensable tool for organizations handling confidential data.

In terms of physical characteristics, the Digicom ED-20 PPP is compact and designed for portability, making it suitable for a variety of environments, including remote work settings and traveling professionals. Its durable construction guarantees longevity, while its lightweight design enhances mobility.

Overall, the Digicom ED-20 PPP stands out as a reliable and feature-rich solution for diverse communication needs, combining flexibility, efficiency, and security in a single device. Whether for business or personal use, the ED-20 effectively meets the demands of modern connectivity.