NONE | | ed20 | |
| | **** | |
169.254.200.100 | 169.254.100.100 |
169.254.200.101 | 255.255.255. | 0 |
255.255.255. | 0 | | |
8.1.1.4 Network Settings
Login | |
1 | Authentication | Select if authentication shall be used or not. |
2 | Username | Set the login username. |
| | This is also used for Telnet sessions (Network configuration). |
3 | Password | Set the login password |
| | This is also used for Telnet sessions (Network configuration). |
PPP Network Interface* |
4 | Local IP | Set the Server IP address. |
5 | Remote Address | Set the Client IP address. |
6 | Subnet Mask | Set the Subnet mask. |
Ethernet Interface* | |
7 | Local IP Address | Set the Local IP address i.e. the address of the ED-20. |
8 | Subnet Mask | Set the Subnet mask. |
*The IP address must be compliant to the attached network. Ask the network administrator when in doubt.
PPP
6609-2221
Contents
Safety
Before installation, maintenance or modification work
Installation
Approvals
Declaration of conformity
Declaration of Conformity
Introduction
Specification
Configuration
Indicators LED
Transient Protection
Application
Mounting /Removal
Maintenance
Installation
Received Data
Connections
Out Transmitted Data
CH1 RS-232 Connections, DCE
CH2 RS-232 Connections, DCE
LED Indicators From left to right
Power
ED-20 working mode
Transmitted Data incoming serial data
DIP Swiches is not used in this product, leave as it is
Factory settings
DIP Switch Settings
Installation of ED-Tool for ED-20
MAC address
System Requirements
Minimum
Application mode
Functional description
About PPP
Network interfaces
Configuration mode
PPP connection
Brouter function
Firewall function
Configuration
Configuration by ED-Tool for ED-20
Typical configuration procedures
Program Start
ED-Tool for ED-20 commands
General commands
Serial Interface Channel 1 specific commands
Selects type of connection, Serial or over the Network
Modem Settings
Modem AT-Commands
16 17 18 Modem Init
Modem Hangup
Modem Connect Dial Out
Network Settings
Login
Password Set the login password
PPP Network Interface
Brouter Settings
Brouter Settings
Brouter Mode
Firewall Settings
Firewall Mode
Firewall Settings
IP Address
Default 57 600 bit/s
Allowed values None, RTS/CTS Default RTS/CTS
Allowed values LL, Pstn Default Pstn
Allowed values
Allowed values NO,YES Default no
Dial IN/OUT
Connect at PWR on
DCD Control
Default +++
Default 2 seconds
Allowed values, 0, 1 to Default 0 function disabled
Default AT&F&D0S0=0&K3+MS=V34&W
Default Ring
Default ATH
Default Connect
Default ATA
Allowed values Default
Allowed values NONE, PAP, Chap Default None
Username
0.0126.0.0.0 128.1.0.0 192.0.1.0 Default
Local IP
Remote address
Subnet Mask
Refer to .2.2 General Modem settings and Dial IN/OUT
Default Off
Brouter Settings IP Address
Firewall Settings IP Address
Example of application with IP address settings
Application examples
Remote connection LAN Dial
LAN LAN Leased Line
LAN LAN PSTN, Brouter, Firewall
T03-03766609-222103.06 Mälartryck AB, Eskilstuna, Sweden