Edimax Technology ES-5226RS manual Segment Uplink

Page 16

Segment Uplink

In the illustration below, two Ethernet switches (with PCs, print server, and local server attached) are connected via 1000-FX or 10/100/1000Base-TX cable. All the devices in this network can communicate with each other through the switches. Connecting servers to the switch allows other users to access the data on server.

10

Image 16

Contents Page Firmware Version FCC Warning Content Page Troubleshooting Package Contents FeaturesIntroduction Page Hardware Description Physical DimensionsFront Panel Page LED Indicators Gigabit port LED IndicatorRear Panel Rack-mounted Installation Desktop InstallationAttaching Rubber Pads Power On Network Application Small WorkgroupSegment Uplink Web-Based Management About Web-based ManagementUser Login MainAdministrator Authentication ConfigurationSystem IP Configuration System Status Default Switch Setting and Reboot Port Configuration Port ManagementPort Configuration interface Port Mirroring Bandwidth Control Page Broadcast Storm Control Vlan Setting Vlan Member Setting Port BasedVlan Member Setting Port Based interface Vlan Mode Page Vlan Pvid Index Setting Vlan Pvid Index Setting interface Per Port Counter Per Port Counter interface QoS Setting Priority Mode Class of Service Configuration Class of Service Configuration interface Security Filter MAC Address Filter interface Trunk Configuration TrunkTrunk Configuration interface Aggregation Information Configuration Backup/Recovery Firmware Update Updating Firmware to the flash interface Name of the firmware and press enter to update Reboot Logout Troubleshooting „ Faulty or loose cablesIncorrect connections „ Non-standard cables„ Improper Network Topologies Diagnosing LED Indicators„ Cabling Technical Specification StandardEMI Appendix 10/100Base-TX Cable Schematic10 /100BASE-TX Pin outs 10/100/1000Base-TX Pin outs 10/100/1000Base-TX Cable Schematic