Edimax Technology ES-5226RS manual Per Port Counter

Page 35

Per Port Counter

This page displays the statistics of each port. Four counter categories—Receive

Packet & Transmit Packet, Collision Count & Transmit Packet, Drop Packet

&Receive Packet, and CRC error Packet & Receive Packet—are available to be chosen.

Receive Packet & Transmit Packet: Displays the counts of received and transmitted packets of each port.

Collision Count & Transmit Packet: Displays the counts of collision occurred and the counts of transmitted packets.

Drop Packet & Receive Packet: Displays the counts of dropped and received packets.

CRC error Packet & Receive Packet: Displays the counts of CRC error occurred and received packets.

29

Image 35

Contents Page Firmware Version FCC Warning Content Page Troubleshooting Introduction FeaturesPackage Contents Page Front Panel Physical DimensionsHardware Description Page Gigabit port LED Indicator LED IndicatorsRear Panel Attaching Rubber Pads Desktop InstallationRack-mounted Installation Power On Small Workgroup Network ApplicationSegment Uplink About Web-based Management Web-Based ManagementMain User LoginAuthentication Configuration AdministratorSystem IP Configuration System Status Default Switch Setting and Reboot Port Management Port ConfigurationPort Configuration interface Port Mirroring Bandwidth Control Page Broadcast Storm Control Vlan Member Setting Port Based Vlan SettingVlan Member Setting Port Based interface Vlan Mode Page Vlan Pvid Index Setting Vlan Pvid Index Setting interface Per Port Counter Per Port Counter interface QoS Setting Priority Mode Class of Service Configuration Class of Service Configuration interface Security Filter MAC Address Filter interface Trunk Trunk ConfigurationTrunk Configuration interface Aggregation Information Configuration Backup/Recovery Firmware Update Updating Firmware to the flash interface Name of the firmware and press enter to update Reboot Logout „ Non-standard cables Troubleshooting„ Faulty or loose cables Incorrect connections„ Cabling Diagnosing LED Indicators„ Improper Network Topologies Standard Technical SpecificationEMI 10 /100BASE-TX Pin outs 10/100Base-TX Cable SchematicAppendix 10/100/1000Base-TX Pin outs 10/100/1000Base-TX Cable Schematic