Edimax Technology ES-5226RS manual Technical Specification, Standard

Page 54

Technical Specification

This section provides the specifications of ES-5226RS.

 

 

 

 

 

 

IEEE802.3 10BASE-T

 

 

 

IEEE802.3u 100BASE-TX

 

 

 

IEEE802.3ab 1000BASE-T

 

 

Standard

IEEE802.3z Gigabit fiber

 

 

 

IEEE802.3x Flow control and Back pressure

 

 

 

IEEE802.3ad Port Trunk

 

 

 

IEEE802.1p Class of Service

 

 

 

 

 

 

 

System power (Green)

 

 

 

10/100TX Port:

 

 

LED Indicators

Activity/ Duplex (Green), Speed (Amber)

 

 

 

10/100/1000T/Mini-GBIC Combo:

 

 

 

Activity/ Duplex (Green), Speed (Green)

 

 

 

 

 

 

 

10/100TX: 24 x RJ-45 with Auto MDI/MDI-X function

 

 

Connector

10/100/1000T/Mini-GBIC Combo: 2 x RJ-45 with Auto

 

 

 

MDI/MDI-X function + 2 x 1000 SFP Sockets

 

 

 

 

 

 

Switch architecture

Store and Forward

 

 

 

 

 

 

Back-plane

8.8Gbps with full wire speed

 

 

 

 

 

 

MAC address

4K Mac with Auto Learning

 

 

 

 

 

 

 

 

 

 

 

48

 

Image 54
Contents Page Firmware Version FCC Warning Content Page Troubleshooting Features Package ContentsIntroduction Page Physical Dimensions Hardware DescriptionFront Panel Page LED Indicators Gigabit port LED IndicatorRear Panel Desktop Installation Rack-mounted InstallationAttaching Rubber Pads Power On Network Application Small WorkgroupSegment Uplink Web-Based Management About Web-based ManagementUser Login MainAdministrator Authentication ConfigurationSystem IP Configuration System Status Default Switch Setting and Reboot Port Configuration Port ManagementPort Configuration interface Port Mirroring Bandwidth Control Page Broadcast Storm Control Vlan Setting Vlan Member Setting Port BasedVlan Member Setting Port Based interface Vlan Mode Page Vlan Pvid Index Setting Vlan Pvid Index Setting interface Per Port Counter Per Port Counter interface QoS Setting Priority Mode Class of Service Configuration Class of Service Configuration interface Security Filter MAC Address Filter interface Trunk Configuration TrunkTrunk Configuration interface Aggregation Information Configuration Backup/Recovery Firmware Update Updating Firmware to the flash interface Name of the firmware and press enter to update Reboot Logout Incorrect connections Troubleshooting„ Faulty or loose cables „ Non-standard cablesDiagnosing LED Indicators „ Improper Network Topologies„ Cabling Technical Specification StandardEMI 10/100Base-TX Cable Schematic Appendix10 /100BASE-TX Pin outs 10/100/1000Base-TX Pin outs 10/100/1000Base-TX Cable Schematic