Edimax Technology ES-5226RS manual Firmware Version

Page 2

Notice

The contents of this manual are based on the table below listing firmware version, software kernel version, and hardware version. If the switch functions are different from the description of the manual, please contact the local sale dealer for more information.

Firmware Version

V1.10

Kernel Version

V1.1.5

Hardware Version

----------

Image 2

Contents Page Firmware Version FCC Warning Content Page Troubleshooting Introduction FeaturesPackage Contents Page Front Panel Physical DimensionsHardware Description Page LED Indicators Gigabit port LED IndicatorRear Panel Attaching Rubber Pads Desktop InstallationRack-mounted Installation Power On Network Application Small WorkgroupSegment Uplink Web-Based Management About Web-based ManagementUser Login MainAdministrator Authentication ConfigurationSystem IP Configuration System Status Default Switch Setting and Reboot Port Configuration Port ManagementPort Configuration interface Port Mirroring Bandwidth Control Page Broadcast Storm Control Vlan Setting Vlan Member Setting Port BasedVlan Member Setting Port Based interface Vlan Mode Page Vlan Pvid Index Setting Vlan Pvid Index Setting interface Per Port Counter Per Port Counter interface QoS Setting Priority Mode Class of Service Configuration Class of Service Configuration interface Security Filter MAC Address Filter interface Trunk Configuration TrunkTrunk Configuration interface Aggregation Information Configuration Backup/Recovery Firmware Update Updating Firmware to the flash interface Name of the firmware and press enter to update Reboot Logout Incorrect connections Troubleshooting„ Faulty or loose cables „ Non-standard cables„ Cabling Diagnosing LED Indicators„ Improper Network Topologies Technical Specification StandardEMI 10 /100BASE-TX Pin outs 10/100Base-TX Cable SchematicAppendix 10/100/1000Base-TX Pin outs 10/100/1000Base-TX Cable Schematic