AN6077
//setup GPIF transaction count
SYNCDELAY;
EP2GPIFTCH = EP2FIFOBCH; SYNCDELAY;
EP2GPIFTCL = EP2FIFOBCL;
//trigger FIFO write transaction(s), using SFR
SYNCDELAY;
GPIFTRIG = GPIFTRIGWR GPIF_EP2;
//once master (GPIF) drains OUT packet, it (re)arms to usb domain
//this path is always auto, meaning core handles it
if( xFIFOTC_OUT < enum_pkt_size )
{
//handle short packet to peripheral
//wait for the transaction to terminate naturally while( !( GPIFTRIG & 0x80 ) )
{
; // poll GPIFTRIG.7, DONE bit...
}
//signal short packet to peripheral here
//in this implementation CTL2 is tied to PKTEND of slave
//strobe PKTEND of slave
GPIFIDLECTL = 0x04;
GPIFIDLECTL &= 0xFB;
GPIFIDLECTL = 0x04;
}
else
{
//was max packet size
//let transaction terminate naturally
}
}
else
{
// RDY1=0, when peripheral is FULL
}
}
}
else
{
// DONE=0 when GPIF is "not" IDLE
}
//Handle IN data
//is the GPIF idle if( GPIFTRIG & 0x80 )
{
//check if peripheral is "not empty" if( GPIFREADYSTAT & 0x01 )
{
February 19, 2008 | Document No. | 11 |
[+] Feedback