CY62157E MoBL®
Maximum Ratings
(Above which the useful life may be impaired. For user guide- lines, not tested.)
Storage Temperature | |
Ambient Temperature with |
|
Power Applied | |
Supply Voltage to Ground |
|
Potential | |
DC Voltage Applied to Outputs |
|
in High Z State[6, 7] |
Electrical Characteristics (Over the Operating Range)
DC Input Voltage[6, 7] |
| ||
Output Current into Outputs (LOW) | 20 mA | ||
Static Discharge Voltage |
| > 2001V | |
(per |
| ||
| > 200 mA | ||
Operating Range |
|
| |
|
|
|
|
|
| Ambient | VCC[8] |
Device | Range | Temperature | |
CY62157E | Industrial | 4.5V to 5.5V | |
|
|
|
|
| Automotive |
| |
|
|
|
|
|
|
|
|
|
|
|
| 45 ns (Industrial) | 55 ns (Automotive) |
| ||||
Parameter | Description |
|
| Test Conditions | Min | Typ[4] | Max | Min | Typ[4] | Max | Unit | |||
VOH | Output HIGH |
| IOH = | VCC = 4.5V | 2.4 |
|
| 2.4 |
|
| V | |||
| Voltage |
|
|
|
|
|
|
|
|
|
|
|
|
|
VOL | Output LOW |
| IOL = 2.1 mA | VCC = 4.5V |
|
| 0.4 |
|
| 0.4 | V | |||
| Voltage |
|
|
|
|
|
|
|
|
|
|
|
|
|
VIH | Input HIGH |
| VCC = 4.5V to 5.5V | 2.2 |
| VCC + 0.5 | 2.2 |
| VCC + 0.5 | V | ||||
| Voltage |
|
|
|
|
|
|
|
|
|
|
|
|
|
VIL | Input LOW |
| VCC = 4.5V to 5.5V |
| 0.8 |
| 0.8 | V | ||||||
| Voltage |
|
|
|
|
|
|
|
|
|
|
|
|
|
IIX | Input Leakage |
| GND < VI < VCC |
| +1 |
| +1 | ∝A | ||||||
| Current |
|
|
|
|
|
|
|
|
|
|
|
|
|
IOZ | Output Leakage |
| GND < VO < VCC, Output Disabled |
| +1 |
| +1 | ∝A | ||||||
| Current |
|
|
|
|
|
|
|
|
|
|
|
|
|
ICC | VCC Operating |
| f = fmax = 1/tRC | VCC = VCCmax |
| 18 | 25 |
| 18 | 35 |
| |||
| Supply |
| f = 1 MHz | IOUT = 0 mA |
| 1.8 | 3 |
| 1.8 | 4 | mA | |||
| Current |
|
|
| CMOS levels |
|
|
|
|
|
|
| ||
ISB1 | Automatic CE |
|
| 1 > VCC − 0.2V, CE2 < 0.2V, |
| 2 | 8 |
| 2 | 30 | ∝A | |||
CE | ||||||||||||||
|
| VIN > VCC – 0.2V, VIN < 0.2V, |
|
|
|
|
|
|
| |||||
| Current — |
| f = fmax (Address and Data Only), |
|
|
|
|
|
|
| ||||
| CMOS Inputs |
| f = 0 (OE, BHE, BLE and |
|
|
|
|
|
|
|
|
| ||
| WE), |
|
|
|
|
|
|
| ||||||
|
|
| VCC = 3.60V |
|
|
|
|
|
|
|
|
|
| |
ISB2 | Automatic CE |
|
| 1 > VCC – 0.2V or CE2 < 0.2V, |
| 2 | 8 |
| 2 | 30 | ∝A | |||
CE | ||||||||||||||
|
| VIN > VCC – 0.2V or VIN < 0.2V, |
|
|
|
|
|
|
| |||||
| Current — |
| f = 0, VCC = 3.60V |
|
|
|
|
|
|
| ||||
| CMOS Inputs |
|
|
|
|
|
|
|
|
|
|
|
|
|
Capacitance[9]
Parameter | Description | Test Conditions | Max | Unit |
|
|
|
|
|
CIN | Input Capacitance | TA = 25°C, f = 1 MHz, VCC = VCC(typ) | 10 | pF |
COUT | Output Capacitance |
| 10 | pF |
Notes:
6.VIL(min) =
7.VIH(max) = VCC + 0.75V for pulse durations less than 20 ns.
8.Full device AC operation assumes a 100 ∝s ramp time from 0 to VCC(min) and 200 ∝s wait time after VCC stabilization.
9.Tested initially and after any design or process changes that may affect these parameters.
Document #: | Page 3 of 12 |
[+] Feedback