Dell 7000 Series manual Stack

Page 28

Stacking Dell PowerConnect 7000 Series Switches

Stack:

configure terminal vlan database

vlan 10,20 exit

vlan 10

name “Routed interface to PIM RP via port-channel 1” exit

vlan 20

name “Routed interface to downstream switched network” exit

hostname "nsf-stack" spanning-tree mode rst ip igmp

ip pim sparse ip multicast

ip pim rp-address 192.168.10.1 239.0.1.1 255.255.255.0

interface Port-channel1

description “LAG to PIM router – VLAN 10 – gi1/0/10, gi2/0/10” switchport mode trunk

switchport trunk native vlan 10 switchport trunk allowed vlan remove 1

exit

interface vlan 10

ip address 192.168.10.2 255.255.255.0 ip igmp

ip pim exit

interface vlan 20

ip address 192.168.20.2 255.255.255.0 ip igmp

ip pim exit

router ospf router-id 2.2.2.2

network 192.168.0.0 0.0.255.255 area 0 nsf

exit

interface gi1/0/10

no spanning-tree auto-portfast channel-group 1 mode auto

Page 26

Image 28

Contents Stacking Dell PowerConnect Series Switches Dell Technical White PaperStacking Dell PowerConnect 7000 Series Switches Contents Applicability IntroductionStacking and Management Stacking and Performance Stacking and RedundancyDual Stacking Modules Configured in a Ring Mixing M6348 and PC7000 Series Switches in a Stack Power-Up Sequencing ConsiderationsConsole#boot auto-copy-sw allow-downgrade Initial Installation and Power-up of a Stack Selecting the Master Unit Selecting the Standby UnitAutomatic Update Updating the Firmware on a StackManual Update Creating a Separate Vlan for File Downloads FTPFrom the Switching Vlan Vlan Membership page, click Add Navigate to the Routing IP IP Interface Configuration Page Stacking Dell PowerConnect 7000 Series Switches Click Apply Adding a Stack Member with Minimal Interruption Removing a Stack Member with Minimal Interruption Master Failover Merging Two Operational StacksEffect of Master Failover on PoE Devices Failover Scenarios Stack Member FailoverScenario Stack Split Stack Split with Manager Failure Nonstop Forwarding Initiating a Warm Failover of the Manager Unit Nonstop Forwarding ScenarioNonstop Forwarding Example NSF Scenario Configuration via CLI RouterStack Switch Switch NSF Example NSF Re-convergence Timing Parameter TimingStacking CLI Commands Small ConfigurationStacking Web Interface Summary