Dell 7000 Series manual

Page 16

Stacking Dell PowerConnect 7000 Series Switches

9.In the Interface field, select VLAN 1000. In the Routing Mode field, select Enable. In the IP Address Configuration Method field, select Manual. In the IP Address field, enter 192.168.21.11. In the Subnet Mask field, enter 255.255.255.0. Click Apply.

10.Navigate to the System > Management Security > Access Profile page. Choose the Add Profile tab. Enter MGMT_VLAN in the Access Profile Name field. Select the Interface check box and the VLAN radio button. Choose 1000 in the VLAN drop down. Enable the Source IP Address check box and enter 192.168.21.0 in the Source Ip Address field. Enter 255.255.255.0 in the Network Mask field. Ensure that the Action field is set to Permit and set the Rule Priority field to 1.

Page 14

Image 16
Contents Stacking Dell PowerConnect Series Switches Dell Technical White PaperStacking Dell PowerConnect 7000 Series Switches Contents Applicability IntroductionStacking and Management Stacking and Performance Stacking and RedundancyDual Stacking Modules Configured in a Ring Mixing M6348 and PC7000 Series Switches in a Stack Power-Up Sequencing ConsiderationsConsole#boot auto-copy-sw allow-downgrade Initial Installation and Power-up of a Stack Selecting the Master Unit Selecting the Standby UnitAutomatic Update Updating the Firmware on a StackManual Update Creating a Separate Vlan for File Downloads FTPFrom the Switching Vlan Vlan Membership page, click Add Navigate to the Routing IP IP Interface Configuration Page Stacking Dell PowerConnect 7000 Series Switches Click Apply Adding a Stack Member with Minimal Interruption Removing a Stack Member with Minimal Interruption Master Failover Merging Two Operational StacksEffect of Master Failover on PoE Devices Failover Scenarios Stack Member FailoverScenario Stack Split Stack Split with Manager Failure Nonstop Forwarding Initiating a Warm Failover of the Manager Unit Nonstop Forwarding ScenarioNonstop Forwarding Example NSF Scenario Configuration via CLI RouterStack Switch Switch NSF Example NSF Re-convergence Timing Parameter TimingStacking CLI Commands Small ConfigurationStacking Web Interface Summary