Carrier Access 3104s quick start Chassis Overview, Front, Back

Page 11

Quick Start

Chassis Overview

Chassis Overview

Front

Alarm

Status


					(1) DS1/E1 (WAN)
	(4) 10/100Base-T Reset				(1) DS1/E1 (WAN)		Tip & Ring Telco
	(4) 10/100Base-T Reset				(E1-future)		Tip & Ring Telco
	Ethernet (LAN)						Connector
	Ethernet (LAN)			(1) 10/100Base-T			Connector
				(1) 10/100Base-T
				Ethernet (WAN)

Back

		Power/Battery/Status		RS-		232

Ground
				Management
				Port

Adit 3104 - Release 1.6

11

Image 11

Contents Adit Page Quick Start Guide Unpacking and Inspection Electrostatic Discharge ESD PrecautionsInstallation Environment Installation User SafetyFerrite bead shipped with Adit chassis Compliant InstallationFerrite Beads Wall Mounting To rack mount the Adit 3000, follow the instructions below Rack Mounting Optional FeatureTray Slide Adit 3104, 3200 and 3400 Battery Backup Back Chassis OverviewFront Grounding the Unit Interface ConnectorsFront of Adit Back of AditTo connect -48 VDC power PowerBattery Connection To connect AC powerPair Pin Function Color Code Pair Telco ConnectorDirection RS-232 Craft Port Female DB-9Description State Description DS1/E1 Connection PortsDS1/E1 RJ-48C Pin Name DescriptionEthernet RJ-45 Reset Button10/100Base-TX Ethernet Alarm/Status LEDs #show interface ethernet 2 Eth WAN To access the management consoleCommand Description Web-Based ManagementSet the New-line/Transmit value CR+LF Setting up a CLI ConnectionLog Adit 3104 show version Key Enabled Software FeaturesSetup Adit for access via Web-Browser Basic ConfigurationSelect Restore Defaults Restore Factory DefaultsModify Default Admin User Quick Start Web-browser Configure Ethernet WAN InterfaceSelect Apply to apply the new settings Set Network to WAN Configure Serial1 as WANSelect the Enable button Select Use SIP Proxy Configure the Adit 3104 as a SIP Line GatewayQuick Start Quick Start Basic Configuration Adit 3104 Release