Quick Start
Interface Connectors
DS1/E1 Connection Ports | 1 | 8 |
Each DS1/E1 connection port is equipped with a standard
Adit 3000 unit. Note: E1 will be available in a future release.
The pinouts are as follows:
DS1/E1 RJ-48C
The pinouts are as follows:
Pin | Name | Description |
1 | Receive Ring | Receive from DS1 network |
|
|
|
2 | Receive Tip | Receive from DS1 network |
|
|
|
3 | N/C | Not connected |
|
|
|
4 | Transmit Ring | To DS1 network |
|
|
|
5 | Transmit Tip | To DS1 network |
|
|
|
N/C | Not connected | |
|
|
|
The LEDs are as follows (left LED only):
State | Description |
Off | Off line |
|
|
Green | Normal |
|
|
Red | Loss of Signal (LOS) |
|
|
Yellow | Bipolar Violation (BPV) |
|
|
Flashing Green | Loopback active |
|
|
Flashing Yellow | Yellow Alarm (Remote Alarm Indication) |
|
|
Flashing Red (Slow) | Loss of Frame (LOF) or Alarm Indication Signal (AIS) |
|
|
Flashing Red (Fast) | |
|
|
16 | Adit 3104 - Release 1.6 |