Carrier Access 3104s quick start Alarm/Status LEDs

Page 18

Quick Start

Alarm/Status LEDs

Alarm/Status LEDs

LED

State

Description

Critical

Off

No critical alarms present

 

 

 

 

Red

Critical alarms present. Critical alarms include:

 

 

user-configured manor environmental inputs.

 

 

 

Major

Off

No major alarms present

 

 

 

 

Red

Major alarm present. Major alarms include:

 

 

user-configured manor environmental inputs, DS1 short, DS1 open, DS1

 

 

facility alarm, DS1 RAI, DS1 AIS, DS1 LOF, DS1 LOS, WAN fault,

 

 

Ethernet fault and dead card alarms.

 

 

 

Minor

Off

No minor alarms present

 

 

 

 

Red

Minor alarms present. Minor alarms include:

 

 

user-configured minor environmental inputs, DS1 excessive line code

 

 

violations.

 

 

 

Status

Off

No power to system

 

 

 

 

Green

Application running, no detected system problems.

 

 

 

 

Green Flashing

Power-On Self Test (POST) successful. System booted. Loading

 

 

Application.

 

 

 

 

Green/Yellow

Flashing alternate colors. Application Self Test in Process.

 

 

 

 

Yellow

Yellow while booting. If this stays a steady yellow the Power-On Self Test

 

 

(POST) failed.

 

 

 

 

Yellow Flashing

Power-On Self Test (POST) In Process.

 

 

 

 

Red

System Failure

 

 

 

18

Adit 3104 - Release 1.6

Image 18
Contents Adit Page Quick Start Guide Electrostatic Discharge ESD Precautions Installation EnvironmentUnpacking and Inspection User Safety InstallationCompliant Installation Ferrite BeadsFerrite bead shipped with Adit chassis Wall Mounting Rack Mounting Optional Feature To rack mount the Adit 3000, follow the instructions belowTray Slide Adit 3104, 3200 and 3400 Battery Backup Chassis Overview FrontBack Back of Adit Interface ConnectorsFront of Adit Grounding the UnitTo connect AC power PowerBattery Connection To connect -48 VDC powerPair Telco Connector Pair Pin Function Color CodeRS-232 Craft Port Female DB-9 DescriptionDirection Pin Name Description DS1/E1 Connection PortsDS1/E1 RJ-48C State DescriptionReset Button 10/100Base-TX EthernetEthernet RJ-45 Alarm/Status LEDs Web-Based Management To access the management consoleCommand Description #show interface ethernet 2 Eth WANSetting up a CLI Connection Set the New-line/Transmit value CR+LFLog Key Enabled Software Features Adit 3104 show versionBasic Configuration Setup Adit for access via Web-BrowserRestore Factory Defaults Select Restore DefaultsModify Default Admin User Quick Start Configure Ethernet WAN Interface Web-browserSelect Apply to apply the new settings Configure Serial1 as WAN Set Network to WANSelect the Enable button Configure the Adit 3104 as a SIP Line Gateway Select Use SIP ProxyQuick Start Quick Start Basic Configuration Adit 3104 Release