Carrier Access 3104s quick start Configure Ethernet WAN Interface, Web-browser

Page 27

Quick Start

Basic Configuration

Configure Ethernet WAN Interface

In the web-browser:

1.Select Network Connections from the Navigation bar.

2.It is recommended that you disable/delete the Serial1 port.

3.Select (click) Ethernet 2 (WAN Ethernet) connection to configure.

4.Select the Enable button, to configure the WAN Ethernet up (or in-service).

5.Select the Settings button.

Adit 3104 - Release 1.6

27

Image 27

Contents Adit Page Quick Start Guide Electrostatic Discharge ESD Precautions Installation EnvironmentUnpacking and Inspection Installation User SafetyCompliant Installation Ferrite BeadsFerrite bead shipped with Adit chassis Wall Mounting To rack mount the Adit 3000, follow the instructions below Rack Mounting Optional FeatureTray Slide Adit 3104, 3200 and 3400 Battery Backup Chassis Overview FrontBack Grounding the Unit Interface ConnectorsFront of Adit Back of AditTo connect -48 VDC power PowerBattery Connection To connect AC powerPair Pin Function Color Code Pair Telco ConnectorRS-232 Craft Port Female DB-9 DescriptionDirection State Description DS1/E1 Connection PortsDS1/E1 RJ-48C Pin Name DescriptionReset Button 10/100Base-TX EthernetEthernet RJ-45 Alarm/Status LEDs #show interface ethernet 2 Eth WAN To access the management consoleCommand Description Web-Based ManagementSet the New-line/Transmit value CR+LF Setting up a CLI ConnectionLog Adit 3104 show version Key Enabled Software FeaturesSetup Adit for access via Web-Browser Basic Configuration Select Restore Defaults Restore Factory DefaultsModify Default Admin User Quick Start Web-browser Configure Ethernet WAN InterfaceSelect Apply to apply the new settings Set Network to WAN Configure Serial1 as WANSelect the Enable button Select Use SIP Proxy Configure the Adit 3104 as a SIP Line GatewayQuick Start Quick Start Basic Configuration Adit 3104 Release