Carrier Access 3104s quick start Select Apply to apply the new settings

Page 28

Quick Start

Basic Configuration

6.Set Internet Protocol to Obtain an IP Address Automatically, from the pulldown menu. This will enable the Adit 3104 as a DHCP Client. Leave the other fields to their default settings.

7. Select Apply to apply the new settings.

28	Adit 3104 - Release 1.6

Image 28

Contents Adit Page Quick Start Guide Installation Environment Electrostatic Discharge ESD PrecautionsUnpacking and Inspection User Safety InstallationFerrite Beads Compliant InstallationFerrite bead shipped with Adit chassis Wall Mounting Rack Mounting Optional Feature To rack mount the Adit 3000, follow the instructions belowTray Slide Adit 3104, 3200 and 3400 Battery Backup Front Chassis OverviewBack Interface Connectors Front of AditBack of Adit Grounding the UnitPower Battery ConnectionTo connect AC power To connect -48 VDC powerPair Telco Connector Pair Pin Function Color CodeDescription RS-232 Craft Port Female DB-9Direction DS1/E1 Connection Ports DS1/E1 RJ-48CPin Name Description State Description10/100Base-TX Ethernet Reset ButtonEthernet RJ-45 Alarm/Status LEDs To access the management console Command DescriptionWeb-Based Management #show interface ethernet 2 Eth WANSetting up a CLI Connection Set the New-line/Transmit value CR+LFLog Key Enabled Software Features Adit 3104 show versionBasic Configuration Setup Adit for access via Web-BrowserRestore Factory Defaults Select Restore DefaultsModify Default Admin User Quick Start Configure Ethernet WAN Interface Web-browserSelect Apply to apply the new settings Configure Serial1 as WAN Set Network to WANSelect the Enable button Configure the Adit 3104 as a SIP Line Gateway Select Use SIP ProxyQuick Start Quick Start Basic Configuration Adit 3104 Release