Carrier Access 3104s Configure the Adit 3104 as a SIP Line Gateway, Select Use SIP Proxy

Page 31

Quick Start

Basic Configuration

Configure the Adit 3104 as a SIP Line Gateway

In the web-browser:

1.Select Voice Over IP from the Navigation bar.

2.Select Use SIP Proxy.

3.Enter Softswitch IP Address, User name and Password.

4.Select applicable Codecs.

5.Select Apply to apply the new settings.

Adit 3104 - Release 1.6

31

Image 31

Contents Adit Page Quick Start Guide Installation Environment Electrostatic Discharge ESD PrecautionsUnpacking and Inspection Installation User SafetyFerrite Beads Compliant InstallationFerrite bead shipped with Adit chassis Wall Mounting To rack mount the Adit 3000, follow the instructions below Rack Mounting Optional FeatureTray Slide Adit 3104, 3200 and 3400 Battery Backup Front Chassis OverviewBack Grounding the Unit Interface ConnectorsFront of Adit Back of AditTo connect -48 VDC power PowerBattery Connection To connect AC powerPair Pin Function Color Code Pair Telco ConnectorDescription RS-232 Craft Port Female DB-9Direction State Description DS1/E1 Connection PortsDS1/E1 RJ-48C Pin Name Description10/100Base-TX Ethernet Reset ButtonEthernet RJ-45 Alarm/Status LEDs #show interface ethernet 2 Eth WAN To access the management consoleCommand Description Web-Based ManagementSet the New-line/Transmit value CR+LF Setting up a CLI ConnectionLog Adit 3104 show version Key Enabled Software FeaturesSetup Adit for access via Web-Browser Basic ConfigurationSelect Restore Defaults Restore Factory DefaultsModify Default Admin User Quick Start Web-browser Configure Ethernet WAN InterfaceSelect Apply to apply the new settings Set Network to WAN Configure Serial1 as WANSelect the Enable button Select Use SIP Proxy Configure the Adit 3104 as a SIP Line GatewayQuick Start Quick Start Basic Configuration Adit 3104 Release