Carrier Access 3104s quick start Select the Enable button

Page 30

Quick Start

Basic Configuration

6. Select the Enable button.

30	Adit 3104 - Release 1.6

Image 30

Contents Adit Page Quick Start Guide Electrostatic Discharge ESD Precautions Installation EnvironmentUnpacking and Inspection User Safety InstallationCompliant Installation Ferrite BeadsFerrite bead shipped with Adit chassis Wall Mounting Rack Mounting Optional Feature To rack mount the Adit 3000, follow the instructions belowTray Slide Adit 3104, 3200 and 3400 Battery Backup Chassis Overview FrontBack Back of Adit Interface ConnectorsFront of Adit Grounding the UnitTo connect AC power PowerBattery Connection To connect -48 VDC powerPair Telco Connector Pair Pin Function Color CodeRS-232 Craft Port Female DB-9 DescriptionDirection Pin Name Description DS1/E1 Connection PortsDS1/E1 RJ-48C State DescriptionReset Button 10/100Base-TX EthernetEthernet RJ-45 Alarm/Status LEDs Web-Based Management To access the management consoleCommand Description #show interface ethernet 2 Eth WANSetting up a CLI Connection Set the New-line/Transmit value CR+LFLog Key Enabled Software Features Adit 3104 show versionBasic Configuration Setup Adit for access via Web-BrowserRestore Factory Defaults Select Restore DefaultsModify Default Admin User Quick Start Configure Ethernet WAN Interface Web-browserSelect Apply to apply the new settings Configure Serial1 as WAN Set Network to WANSelect the Enable button Configure the Adit 3104 as a SIP Line Gateway Select Use SIP ProxyQuick Start Quick Start Basic Configuration Adit 3104 Release