B&B Electronics I-7011 user manual #Aa, Syntax #AACHKcr

Page 24

2.3 #AA

Description : Read Analog Input

Syntax : #AA[CHK](cr)

#delimiter character

AAaddress of reading module(00 to FF) Response : Valid Command : >(Data)[CHK](cr)

Syntax error or communication error may get no re- sponse.

>delimiter for valid command

(Data) analog input value, reference Sec.1.10 for its format. For I-7018/18P, the data is the combination for each chan-

nel respectively.
Example :
Command : #01	Receive : >+02.635
Read address 01, return data success.
Command : #02	Receive : >4C53

Read address 02, return data in HEX format success. Command : #04

Receive : >+05.123+04.153+07.234-02.356+10.000- 05.133+02.345+08.234

Module address 04 is I-7018. Read address 04, get analog input data of 8 channels.

Related Command :

Sec.2.1 %AANNTTCCFF, Sec.2.7 $AA2

Rev:B1.0

Image 24

Contents Warranty CopyrightTrademark Table of Contents @AADOData High/Low Alarm Introduction More InformationPin Assignment RevB1.0 Specifications 7011/I-7011D7011P/I-7011PD 7018 7018PBlock Diagram Wire Connection Page Default Setting Jumper SettingQuick Start Calibration Don’t Perform Calibrate Until You Really UnderstandConfiguration Tables Baudrate Setting CC Analog Input Type Setting TTData Format Setting FF Analog input type and data format table Type Input Range Data Format +F.S Zero CodeRevB1.0 Type Input Range Data Format +F.S Zero Code Command Sec.2.19 Related Command Syntax %AANNTTCCFFCHKcrAACHKcr ?AACHKcrSyntax #**CHKcr Example#AA Syntax #AACHKcrResponse Valid Command DataCHKcr Invalid Command ?AACHKcr #AANSyntax #AANCHKcr $AA0 Syntax $AA0CHKcr$AA1 Syntax $AA1CHKcr$AA2 Syntax $AA2CHKcrAATTCCFFCHKcr FF data format of module reference Sec.1.10 Example$AA3 Syntax $AA3CHKcr$AA4 Syntax $AA4CHKcrAASDataCHKcr Data synchronized data, format reference Sec.1.10 Example10 $AA5VV Syntax $AA5VVCHKcr11 $AA6 Syntax $AA6CHKcrAAVVCHKcr 12 $AA8 Syntax $AA8CHKcrAAVCHKcr 13 $AA8V Syntax $AA8VCHKcrRelated Command Sec.2.8 $AA3 14 $AA9DataSyntax $AA9DataCHKcr AA address of response module 00 to FF Example15 $AAB Syntax $AABCHKcrAASCHKcr 16 $AAF Syntax $AAFCHKcrAADataCHKcr 17 $AAM Syntax $AAMCHKcr18 $AAZData Syntax $AAZDataCHKcrRead address 01 module name, return 7018. Related Command 19 ~AAODataSyntax ~AAODataCHKcr 20 ~AAEV Syntax ~AAEVCHKcrRelated Topic 21 @AADI Syntax @AADICHKcrAASOOIICHKcr Level. ExampleHigh 22 @AADOData 23 @AAEAT Syntax @AAEATCHKcr24 @AAHIData 25 @AALOData Related Command Sec.2.23 @AAEAT Related Topic 26 @AADASyntax @AADACHKcr 27 @AACA Syntax @AACACHKcrRead address 01 high alarm, return +2.5000. Related Command 28 @AARHSyntax @AARHCHKcr 29 @AARL Read address 01 event counter, return 1234. Related Command 30 @AARESyntax @AARECHKcr 31 @AACE Syntax @AACECHKcr32 ~ Description Host OKSyntax ~**CHKcr Response No response. ExampleHost watchdog timeout flag, 0=Clear, 1=Set Example 33 ~AA0Syntax ~AA0CHKcr AASSCHKcr34 ~AA1 Syntax ~AA1CHKcr35 ~AA2 Syntax ~AA2CHKcr36 ~AA3EVV Syntax ~AA3EVVCHKcr37 ~AA4 Syntax ~AA4CHKcrAAPPSSCHKcr SS Safe Value, data format is same as PP Example38 ~AA5PPSS Syntax ~AA5PPSSCHKcrINIT* pin Operation Module StatusDual Watchdog Operation Digital Input and Event CounterDigital Output Dual Watchdog = Module Watchdog + Host WatchdogHigh/Low Alarm Thermocouple Measurement

2.3 #AA

Syntax : #AA[CHK](cr)

Example :

Related Command :

Related Topics :

Rev:B1.0