B&B Electronics I-7011 user manual Syntax $AA1CHKcr

Page 27

2.6 $AA1

Description : Perform Zero Calibration

Syntax : $AA1[CHK](cr)

$	delimiter character
AA	address of setting module (00 to FF)
1	command for performing zero calibration
Response : Valid Command :		!AA[CHK](cr)
	Invalid Command :	?AA[CHK](cr)
	Syntax error or communication error may get no re-
	sponse.
!	delimiter for valid command

?delimiter for invalid command or the calibration is not enabled

AAaddress of response module(00 to FF) Example :

Command : $011	Receive : !01
Perform address 01 zero calibration, return success.
Command : $021	Receive : ?02

Perform address 02 zero calibration, return the calibration is not enabled before perform calibration command.

Related Command :

Sec.2.5 $AA0, Sec.2.20 ~AAEV

Related Topics :

Sec.1.9 Calibration

Rev:B1.0

I-7011, I-7018 User Manual

27

Image 27

Contents Warranty CopyrightTrademark Table of Contents @AADOData High/Low Alarm More Information IntroductionPin Assignment RevB1.0 7011/I-7011D Specifications7011P/I-7011PD 7018P 7018Block Diagram Wire Connection Page Default Setting Jumper SettingQuick Start Don’t Perform Calibrate Until You Really Understand CalibrationConfiguration Tables Baudrate Setting CC Analog Input Type Setting TTData Format Setting FF Type Input Range Data Format +F.S Zero Code Analog input type and data format tableRevB1.0 Type Input Range Data Format +F.S Zero Code Command Sec.2.19 ?AACHKcr Related CommandSyntax %AANNTTCCFFCHKcr AACHKcrExample Syntax #**CHKcrSyntax #AACHKcr #AAResponse Valid Command DataCHKcr Invalid Command ?AACHKcr #AANSyntax #AANCHKcr Syntax $AA0CHKcr $AA0Syntax $AA1CHKcr $AA1FF data format of module reference Sec.1.10 Example $AA2Syntax $AA2CHKcr AATTCCFFCHKcrSyntax $AA3CHKcr $AA3Data synchronized data, format reference Sec.1.10 Example $AA4Syntax $AA4CHKcr AASDataCHKcrSyntax $AA5VVCHKcr 10 $AA5VV11 $AA6 Syntax $AA6CHKcrAAVVCHKcr 12 $AA8 Syntax $AA8CHKcrAAVCHKcr Syntax $AA8VCHKcr 13 $AA8VAA address of response module 00 to FF Example Related Command Sec.2.8 $AA314 $AA9Data Syntax $AA9DataCHKcr15 $AAB Syntax $AABCHKcrAASCHKcr 16 $AAF Syntax $AAFCHKcrAADataCHKcr Syntax $AAMCHKcr 17 $AAMSyntax $AAZDataCHKcr 18 $AAZDataRead address 01 module name, return 7018. Related Command 19 ~AAODataSyntax ~AAODataCHKcr 20 ~AAEV Syntax ~AAEVCHKcrRelated Topic Level. Example 21 @AADISyntax @AADICHKcr AASOOIICHKcrHigh 22 @AADOData Syntax @AAEATCHKcr 23 @AAEAT24 @AAHIData 25 @AALOData Related Command Sec.2.23 @AAEAT Related Topic 26 @AADASyntax @AADACHKcr Syntax @AACACHKcr 27 @AACARead address 01 high alarm, return +2.5000. Related Command 28 @AARHSyntax @AARHCHKcr 29 @AARL Read address 01 event counter, return 1234. Related Command 30 @AARESyntax @AARECHKcr Syntax @AACECHKcr 31 @AACEResponse No response. Example 32 ~Description Host OK Syntax ~**CHKcrAASSCHKcr Host watchdog timeout flag, 0=Clear, 1=Set Example33 ~AA0 Syntax ~AA0CHKcrSyntax ~AA1CHKcr 34 ~AA1Syntax ~AA2CHKcr 35 ~AA2Syntax ~AA3EVVCHKcr 36 ~AA3EVVSS Safe Value, data format is same as PP Example 37 ~AA4Syntax ~AA4CHKcr AAPPSSCHKcrSyntax ~AA5PPSSCHKcr 38 ~AA5PPSSModule Status INIT* pin OperationDual Watchdog = Module Watchdog + Host Watchdog Dual Watchdog OperationDigital Input and Event Counter Digital OutputThermocouple Measurement High/Low Alarm