Zoom X4 manual Establishing Communication with, Hardware Installation disclaimer box or a Digital

Page 10

b Turn the unit on by pushing the ON/OFF toggle switch.

 

 

The PWR light on the unit’s front panel turns on.

 

c

Plug one end of the supplied phone cord into the unit’s

 

 

ADSL jack and the other end into the ADSL wall jack.

 

d

Plug one end of the USB cable into the modem’s USB

 

 

jack and plug the other end into your computer’s

 

 

corresponding USB port.

3

The unit performs a startup sequence—the front panel LINK

 

light blinks. (For reference, we have included a table on page

 

39 that explains the meaning of the X4’s front panel lights.)

 

Note: You may see a Found New Hardware box

 

indicating the progression of the installation; typically no user

 

action is necessary. If you are using Windows XP, however,

 

you may be required to click Next.

4

Depending on your operating system, you may see a

 

Hardware Installation disclaimer box or a Digital

Signature Not Found dialog box. You can safely ignore these messages and click Yes or Continue Anyway.

Windows XP Users: If prompted to do so, click Finish.

When the startup sequence is complete, the LINK light will change from blinking to solid. Continue below with Establishing Communication with the X4.

Establishing Communication with the X4

1

Depending on your computer’s operating system, you may

 

have a Zoom Web Console icon on your desktop.

If you do, double-click it to display the Network Password dialog box.

If you do not have a Zoom Web Console icon on your desktop, open your Web browser, type http://10.0.0.2 and press Enter to display the Network Password box.

10

X4 ADSL Modem User’s Manual

Image 10
Contents Adsl Modem Copyright 2002 All rights reserved Contents Installation Instructions Important! Before you BeginPackage Contents To Connect via the Ethernet Option Quick Start InstructionsYou Will Also Need Macintosh, Linux, Windows NT, and 95 UsersPanel PWR light on the unit’s front panel turns on Click the Adsl Modem Installation Wizard button To Connect via the USB OptionHardware Installation disclaimer box or a Digital Establishing Communication withType the X4’s default User Name and Password With your X4. This page provides details about your Internet Using Phone Filters If You Need Help Advanced Setup Options How To Use the Advanced OptionsWAN Settings Advanced Setup Options Permanent VC Virtual Circuit Settings Bridge Default GatewayEncapsulation Igmp Internet Group Management ProtocolLAN Settings Dhcp Dynamic Host Configuration ProtocolDhcp Server User ModeIP Address Dhcp Address PoolUser’s IP NAT FirewallSession Name ActionVirtual Server Port Type Public PortPrivate Port Host IP AddressAdvanced Setup Options DMZ Advanced Setup Options DNS User ConfigurationDNS Proxy Selection Adsl Configuration Miscellaneous WAN side Http server Advanced Setup page and LAN SettingsAccess Http server portSystem Administration Monitoring System StatusMonitoring Adsl Status X4 Adsl Modem User’s Manual Perform a Diagnostic Test Performing System Administration TasksChange the Admin Password View System LogResetting the Unit to Its Default Settings Updating the Unit’s Firmware Very ImportantRemoving the X4 Modem FinishBack Panel Front and Back Panel InformationFront Panel Light Description Internet Explorer Configuring Your BrowserInternet Explorer 5.x or Later Next Appendix B Configuring Your Browser Netscape Navigator Select the option Direct connection to the Internet Windows 95 TCP/IP Settings Appendix CSelect Network Component Type dialog box Macintosh TCP/IP Settings For Mac OS 7.6.1 9.2.2 and Above but not OSAppendix C Windows 95, Macintosh, and Linux Users For Mac OS Linux TCP/IP Settings For RedHatNETCONFIG, NETDEV0, and IFCONFIG0 For SuSETroubleshooting Appendix DX4 Adsl Modem User’s Manual Regulatory Information Directive Standard Test Report3372-A 27263 2002