Zoom X4 manual Advanced Setup Options

Page 25

IP address

10.0.0.15

 

 

Subnet mask

255.255.255.0

 

 

Default gateway (X4’s LAN IP address)

10.0.0.2

 

 

Preferred DNS server

10.0.0.2

 

 

Note: These TCP/IP instructions and screenshot are typical of a computer using Windows 2000 or XP; if you are using Windows 98 or Me, yours may differ slightly. If you are using Windows 95, or are a Macintosh or Linux user, and need help with your TCP/IP settings, turn to the Appendix on page 46. Otherwise, continue to Step 6.

6 Return to the Virtual Server page and enter the static IP address 10.0.015 in the Host IP Address field. Click Add This Setting and then click the Write Settings to Flash and Reboot button.

Chapter 2: Advanced Setup Options

25

Image 25
Contents Adsl Modem Copyright 2002 All rights reserved Contents Important! Before you Begin Installation InstructionsPackage Contents You Will Also Need Quick Start InstructionsTo Connect via the Ethernet Option Macintosh, Linux, Windows NT, and 95 UsersPanel PWR light on the unit’s front panel turns on To Connect via the USB Option Click the Adsl Modem Installation Wizard buttonEstablishing Communication with Hardware Installation disclaimer box or a DigitalType the X4’s default User Name and Password With your X4. This page provides details about your Internet Using Phone Filters If You Need Help How To Use the Advanced Options Advanced Setup OptionsWAN Settings Advanced Setup Options Permanent VC Virtual Circuit Settings Encapsulation Default GatewayBridge Igmp Internet Group Management ProtocolDhcp Dynamic Host Configuration Protocol LAN SettingsIP Address User ModeDhcp Server Dhcp Address PoolSession Name NAT FirewallUser’s IP ActionVirtual Server Private Port Public PortPort Type Host IP AddressAdvanced Setup Options DMZ Advanced Setup Options DNS User ConfigurationDNS Proxy Selection Adsl Configuration Miscellaneous Access Advanced Setup page and LAN SettingsWAN side Http server Http server portMonitoring System Status System AdministrationMonitoring Adsl Status X4 Adsl Modem User’s Manual Change the Admin Password Performing System Administration TasksPerform a Diagnostic Test View System LogResetting the Unit to Its Default Settings Very Important Updating the Unit’s FirmwareFinish Removing the X4 ModemBack Panel Front and Back Panel InformationFront Panel Light Description Internet Explorer Configuring Your BrowserInternet Explorer 5.x or Later Next Appendix B Configuring Your Browser Netscape Navigator Select the option Direct connection to the Internet Appendix C Windows 95 TCP/IP SettingsSelect Network Component Type dialog box For Mac OS 7.6.1 9.2.2 and Above but not OS Macintosh TCP/IP SettingsAppendix C Windows 95, Macintosh, and Linux Users For Mac OS For RedHat Linux TCP/IP SettingsFor SuSE NETCONFIG, NETDEV0, and IFCONFIG0Appendix D TroubleshootingX4 Adsl Modem User’s Manual Directive Standard Test Report Regulatory Information3372-A 27263 2002