User Name | Supplied by your service provider. |
|
|
Password | Supplied by your service provider. |
|
|
Service Name | Optional; supplied by your service provider. |
|
|
Disconnect Time | ADSL connection will be dropped after the |
| ADSL line is idle for a certain amount of time |
| (measured in seconds). Select 0 to ensure |
| that you won’t be disconnected. |
Authentication | PPP user authentication method. Default is |
| Auto; you can specify CHAP or PAP only. |
Automatic Reconnect | Disabled by default. Check this box if you |
| want to be reconnected automatically if the |
| ADSL connection is terminated |
| unexpectedly. |
DHCP (Dynamic Host Configuration Protocol)
Typically, you should not need to change your DHCP setting. The only case when you might want to change it is if your provider is using Bridged or Routed IP Encapsulation. Your service provider will instruct you.
DHCP client enable | Check this box only if instructed to by your |
| service provider. |
|
|
Host Name | If necessary, supplied by your service |
| provider. |
|
|
2.3 LAN Settings
By modifying your LAN ADSL setup and DHCP settings, you can control the number of computers that can connect to the X4. The default address range allows 12 computers to join the network. To change your settings, from the Advanced Setup page click the LAN Settings button.
20 | X4 ADSL Modem User’s Manual |