Zoom X4 manual Advanced Setup Options

Page 27

To set this static IP address, go to Start Settings Network and Dial-up Connections. Right-click Local Area Connection and select Properties. Click the Install button. Select the Internet Protocol TCP/IP option and click Properties. Click the radio buttons Use the following IP address and Use the following DNS server addresses, enter the following data, and click OK.

IP address	10.0.0.15

Subnet mask	255.255.255.0

Default gateway (X4’s LAN IP address)	10.0.0.2

Preferred DNS server	10.0.0.2

Note: These TCP/IP instructions and screenshot are typical of a computer using Windows 2000 or XP; if you are using Windows 98 or Me, yours may differ slightly. If you are using Windows 95, or are a Macintosh or Linux user, and need help with your TCP/IP settings, turn to the Appendix on page 46. Otherwise, continue to Step 4.

Chapter 2: Advanced Setup Options

27

Image 27

Contents Adsl Modem Copyright 2002 All rights reserved Contents Important! Before you Begin Installation InstructionsPackage Contents Macintosh, Linux, Windows NT, and 95 Users Quick Start InstructionsYou Will Also Need To Connect via the Ethernet OptionPanel PWR light on the unit’s front panel turns on To Connect via the USB Option Click the Adsl Modem Installation Wizard buttonEstablishing Communication with Hardware Installation disclaimer box or a DigitalType the X4’s default User Name and Password With your X4. This page provides details about your Internet Using Phone Filters If You Need Help How To Use the Advanced Options Advanced Setup OptionsWAN Settings Advanced Setup Options Permanent VC Virtual Circuit Settings Igmp Internet Group Management Protocol Default GatewayEncapsulation BridgeDhcp Dynamic Host Configuration Protocol LAN SettingsDhcp Address Pool User ModeIP Address Dhcp ServerAction NAT FirewallSession Name User’s IPVirtual Server Host IP Address Public PortPrivate Port Port TypeAdvanced Setup Options DMZ Advanced Setup Options User Configuration DNSDNS Proxy Selection Adsl Configuration Miscellaneous Http server port Advanced Setup page and LAN SettingsAccess WAN side Http serverMonitoring System Status System AdministrationMonitoring Adsl Status X4 Adsl Modem User’s Manual View System Log Performing System Administration TasksChange the Admin Password Perform a Diagnostic TestResetting the Unit to Its Default Settings Very Important Updating the Unit’s FirmwareFinish Removing the X4 ModemFront and Back Panel Information Back PanelFront Panel Light Description Configuring Your Browser Internet ExplorerInternet Explorer 5.x or Later Next Appendix B Configuring Your Browser Netscape Navigator Select the option Direct connection to the Internet Appendix C Windows 95 TCP/IP SettingsSelect Network Component Type dialog box For Mac OS 7.6.1 9.2.2 and Above but not OS Macintosh TCP/IP SettingsAppendix C Windows 95, Macintosh, and Linux Users For Mac OS For RedHat Linux TCP/IP SettingsFor SuSE NETCONFIG, NETDEV0, and IFCONFIG0Appendix D TroubleshootingX4 Adsl Modem User’s Manual Directive Standard Test Report Regulatory Information3372-A 27263 2002