Zoom X4 manual Dns, DNS Proxy Selection, User Configuration

Page 28

4 Return to the DMZ page. Type the static IP address 10.0.0.15 in the DMZ Host IP Address field Click Save Changes and then click Write Settings to Flash and Reboot.

2.7 DNS

Typically, you should not need or want to change your DNS settings. Should your service provider instruct you to make changes, however, from the Advanced Setup page, click the DNS button.

DNS Proxy Selection	Default is Use Auto Discovered DNS Servers
	Only.
	Options are:
	—Disable DNS Proxy
	—Use User-Configured DNS Servers Only
	—Auto Discovery + User Configured
User Configuration	IP address of the prime DNS server.
	IP address of the alternate DNS server.

28	X4 ADSL Modem User’s Manual

Image 28

Contents Adsl Modem Copyright 2002 All rights reserved Contents Installation Instructions Important! Before you BeginPackage Contents Quick Start Instructions You Will Also NeedTo Connect via the Ethernet Option Macintosh, Linux, Windows NT, and 95 UsersPanel PWR light on the unit’s front panel turns on Click the Adsl Modem Installation Wizard button To Connect via the USB OptionHardware Installation disclaimer box or a Digital Establishing Communication withType the X4’s default User Name and Password With your X4. This page provides details about your Internet Using Phone Filters If You Need Help Advanced Setup Options How To Use the Advanced OptionsWAN Settings Advanced Setup Options Permanent VC Virtual Circuit Settings Default Gateway EncapsulationBridge Igmp Internet Group Management ProtocolLAN Settings Dhcp Dynamic Host Configuration ProtocolUser Mode IP AddressDhcp Server Dhcp Address PoolNAT Firewall Session NameUser’s IP ActionVirtual Server Public Port Private PortPort Type Host IP AddressAdvanced Setup Options DMZ Advanced Setup Options DNS User ConfigurationDNS Proxy Selection Adsl Configuration Miscellaneous Advanced Setup page and LAN Settings AccessWAN side Http server Http server portSystem Administration Monitoring System StatusMonitoring Adsl Status X4 Adsl Modem User’s Manual Performing System Administration Tasks Change the Admin PasswordPerform a Diagnostic Test View System LogResetting the Unit to Its Default Settings Updating the Unit’s Firmware Very ImportantRemoving the X4 Modem FinishBack Panel Front and Back Panel InformationFront Panel Light Description Internet Explorer Configuring Your BrowserInternet Explorer 5.x or Later Next Appendix B Configuring Your Browser Netscape Navigator Select the option Direct connection to the Internet Windows 95 TCP/IP Settings Appendix CSelect Network Component Type dialog box Macintosh TCP/IP Settings For Mac OS 7.6.1 9.2.2 and Above but not OSAppendix C Windows 95, Macintosh, and Linux Users For Mac OS Linux TCP/IP Settings For RedHatNETCONFIG, NETDEV0, and IFCONFIG0 For SuSETroubleshooting Appendix DX4 Adsl Modem User’s Manual Regulatory Information Directive Standard Test Report3372-A 27263 2002