Zoom X4 manual Macintosh TCP/IP Settings, For Mac OS 7.6.1 9.2.2 and Above but not OS

Page 48

Then click the DNS configuration tab, enter the DNS server information, and click OK.

6	You will see the Network dialog box again. Click OK to
	enable your settings. If prompted to do so, insert your

Windows 95 CD-ROM and click OK.

Macintosh TCP/IP Settings

Depending on your Mac OS, the directions to configure your Macintosh’s network settings will differ. For OS X, follow the instructions on page 50. Otherwise, continue directly below.

For Mac OS 7.6.1 - 9.2.2 and Above but not OS X

1From the Apple menu, choose Control Panels and then TCP/IP to display the TCP/IP dialog box (you will use this dialog box in Step 6).

2On the main toolbar, from the File menu, choose Configurations.

48	X4 ADSL Modem User’s Manual

Image 48

Contents Adsl Modem Copyright 2002 All rights reserved Contents Installation Instructions Important! Before you BeginPackage Contents Quick Start Instructions You Will Also NeedTo Connect via the Ethernet Option Macintosh, Linux, Windows NT, and 95 UsersPanel PWR light on the unit’s front panel turns on Click the Adsl Modem Installation Wizard button To Connect via the USB OptionHardware Installation disclaimer box or a Digital Establishing Communication withType the X4’s default User Name and Password With your X4. This page provides details about your Internet Using Phone Filters If You Need Help Advanced Setup Options How To Use the Advanced OptionsWAN Settings Advanced Setup Options Permanent VC Virtual Circuit Settings Default Gateway EncapsulationBridge Igmp Internet Group Management ProtocolLAN Settings Dhcp Dynamic Host Configuration ProtocolUser Mode IP AddressDhcp Server Dhcp Address PoolNAT Firewall Session NameUser’s IP ActionVirtual Server Public Port Private PortPort Type Host IP AddressAdvanced Setup Options DMZ Advanced Setup Options User Configuration DNSDNS Proxy Selection Adsl Configuration Miscellaneous Advanced Setup page and LAN Settings AccessWAN side Http server Http server portSystem Administration Monitoring System StatusMonitoring Adsl Status X4 Adsl Modem User’s Manual Performing System Administration Tasks Change the Admin PasswordPerform a Diagnostic Test View System LogResetting the Unit to Its Default Settings Updating the Unit’s Firmware Very ImportantRemoving the X4 Modem FinishFront and Back Panel Information Back PanelFront Panel Light Description Configuring Your Browser Internet ExplorerInternet Explorer 5.x or Later Next Appendix B Configuring Your Browser Netscape Navigator Select the option Direct connection to the Internet Windows 95 TCP/IP Settings Appendix CSelect Network Component Type dialog box Macintosh TCP/IP Settings For Mac OS 7.6.1 9.2.2 and Above but not OSAppendix C Windows 95, Macintosh, and Linux Users For Mac OS Linux TCP/IP Settings For RedHatNETCONFIG, NETDEV0, and IFCONFIG0 For SuSETroubleshooting Appendix DX4 Adsl Modem User’s Manual Regulatory Information Directive Standard Test Report3372-A 27263 2002