Zoom X4 manual Appendix C Windows 95, Macintosh, and Linux Users

Page 49

3In the Configurations dialog box, click Duplicate.

4The Duplicate Configuration dialog box appears. Type a name, such as “Zoom ADSL Modem,” and click OK.

5The Configurations dialog box appears again. Highlight your new configuration—in our example, Zoom ADSL Modem—and click Make Active.

6In the TCP/IP dialog box, under Connect via:, select

Ethernet. Under Configure:, select Using DHCP Server. Do not enter anything in the DHCP Client ID field.

Note: If you want to use a static IP address—for example, if you were setting up a virtual server (page 23) or a DMZ (page 26)—you would highlight Manually from the Configure: list and then enter the static IP address, subnet mask, etc.

Appendix C: Windows 95, Macintosh, and Linux Users

49

Image 49

Contents Adsl Modem Copyright 2002 All rights reserved Contents Important! Before you Begin Installation InstructionsPackage Contents You Will Also Need Quick Start InstructionsTo Connect via the Ethernet Option Macintosh, Linux, Windows NT, and 95 UsersPanel PWR light on the unit’s front panel turns on To Connect via the USB Option Click the Adsl Modem Installation Wizard buttonEstablishing Communication with Hardware Installation disclaimer box or a DigitalType the X4’s default User Name and Password With your X4. This page provides details about your Internet Using Phone Filters If You Need Help How To Use the Advanced Options Advanced Setup OptionsWAN Settings Advanced Setup Options Permanent VC Virtual Circuit Settings Encapsulation Default GatewayBridge Igmp Internet Group Management ProtocolDhcp Dynamic Host Configuration Protocol LAN SettingsIP Address User ModeDhcp Server Dhcp Address PoolSession Name NAT FirewallUser’s IP ActionVirtual Server Private Port Public PortPort Type Host IP AddressAdvanced Setup Options DMZ Advanced Setup Options DNS User ConfigurationDNS Proxy Selection Adsl Configuration Miscellaneous Access Advanced Setup page and LAN SettingsWAN side Http server Http server portMonitoring System Status System AdministrationMonitoring Adsl Status X4 Adsl Modem User’s Manual Change the Admin Password Performing System Administration TasksPerform a Diagnostic Test View System LogResetting the Unit to Its Default Settings Very Important Updating the Unit’s FirmwareFinish Removing the X4 ModemBack Panel Front and Back Panel InformationFront Panel Light Description Internet Explorer Configuring Your BrowserInternet Explorer 5.x or Later Next Appendix B Configuring Your Browser Netscape Navigator Select the option Direct connection to the Internet Appendix C Windows 95 TCP/IP SettingsSelect Network Component Type dialog box For Mac OS 7.6.1 9.2.2 and Above but not OS Macintosh TCP/IP SettingsAppendix C Windows 95, Macintosh, and Linux Users For Mac OS For RedHat Linux TCP/IP SettingsFor SuSE NETCONFIG, NETDEV0, and IFCONFIG0Appendix D TroubleshootingX4 Adsl Modem User’s Manual Directive Standard Test Report Regulatory Information3372-A 27263 2002