Zoom X4 manual For Mac OS

Page 50

7Close the TCP/IP dialog box. You will be asked if you want to save the changes. Click Save.

For Mac OS X

1

2

3

4

From the Dock, choose System Preferences and then Network. The Network pane appears.

From the Location: drop-down list box, select New Location…. In the box, type a name of your choosing, such as “Zoom ADSL Modem,” and click OK.

Under the Configure drop-down tab, choose Built-in Ethernet or Ethernet.

Make sure that the TCP/IP tab is foremost.

Make sure that Using DHCP is highlighted in its Configure: dropdown list box. Do not enter anything into the DHCP Client ID field.

Note: If you want to use a static IP address—for example, if you were setting up a virtual server (page 23) or a DMZ (page 26)—you would highlight Manually in the Configure: menu and then enter the static IP address, subnet mask, etc.

50	X4 ADSL Modem User’s Manual

Image 50

Contents Adsl Modem Copyright 2002 All rights reserved Contents Installation Instructions Important! Before you BeginPackage Contents To Connect via the Ethernet Option Quick Start InstructionsYou Will Also Need Macintosh, Linux, Windows NT, and 95 UsersPanel PWR light on the unit’s front panel turns on Click the Adsl Modem Installation Wizard button To Connect via the USB OptionHardware Installation disclaimer box or a Digital Establishing Communication withType the X4’s default User Name and Password With your X4. This page provides details about your Internet Using Phone Filters If You Need Help Advanced Setup Options How To Use the Advanced OptionsWAN Settings Advanced Setup Options Permanent VC Virtual Circuit Settings Bridge Default GatewayEncapsulation Igmp Internet Group Management ProtocolLAN Settings Dhcp Dynamic Host Configuration ProtocolDhcp Server User ModeIP Address Dhcp Address PoolUser’s IP NAT FirewallSession Name ActionVirtual Server Port Type Public PortPrivate Port Host IP AddressAdvanced Setup Options DMZ Advanced Setup Options DNS Proxy Selection User ConfigurationDNS Adsl Configuration Miscellaneous WAN side Http server Advanced Setup page and LAN SettingsAccess Http server portSystem Administration Monitoring System StatusMonitoring Adsl Status X4 Adsl Modem User’s Manual Perform a Diagnostic Test Performing System Administration TasksChange the Admin Password View System LogResetting the Unit to Its Default Settings Updating the Unit’s Firmware Very ImportantRemoving the X4 Modem FinishFront Panel Front and Back Panel InformationBack Panel Light Description Internet Explorer 5.x or Later Configuring Your BrowserInternet Explorer Next Appendix B Configuring Your Browser Netscape Navigator Select the option Direct connection to the Internet Windows 95 TCP/IP Settings Appendix CSelect Network Component Type dialog box Macintosh TCP/IP Settings For Mac OS 7.6.1 9.2.2 and Above but not OSAppendix C Windows 95, Macintosh, and Linux Users For Mac OS Linux TCP/IP Settings For RedHatNETCONFIG, NETDEV0, and IFCONFIG0 For SuSETroubleshooting Appendix DX4 Adsl Modem User’s Manual Regulatory Information Directive Standard Test Report3372-A 27263 2002