Avaya P580, P550R, P880 manual Switch Ports, Following error message in the CLI

Problem:	When the 80-series Supervisor module boots, the switch displays
	the following error message in the CLI:
	Undefined Error -- FILE:gqswport.cLINE:449 Value
	0xfffffffc: Error changing the GQ ‘port use
	diffserv’ flag
Workaround:	Ignore this message.
50-Series	The following problem has no workaround:
Supervisor
Module	■ The display on the P880 switch M5500R-SUPA supervisor
	module may not initialize properly. However, if it becomes
	the active supervisor module, the display becomes functional
	and displays the proper information.

Switch Ports

The following problem has no workaround:

■While switch port parameters are reflected across all ports of a Hunt group, spanning tree parameters are not. If you change the spanning tree priority of the flood port of a Hunt group, but that port does not come up first when bringing up the Hunt group, the spanning tree priority for the group reverts to the default.

Problem:If a switch port is moved from Bind to Receive to Static, all previously bound VLANs are not removed.

*Note: This is NOT a problem with the Bind to All setting.

Workaround: Remove VLANs manually from a port when changing a switch port

connection from Bind to Receive to Static.

RIP

Problem:Configuring a RIP V1/V2 interface sends V2 packets to a V1 interface.

Workaround: If the corresponding interface is in RIP v1, configure your interface to RIP v1.

610-0184-095 June 14, 2001 27