Zonet Technology ZEW3003 manual Client

Page 15

4.4.2 Client

￿SSID: Default value is default.

￿Network Type: Select from Infrastructure and Ad-Hoc. Default setting is Infrastructure.

In Client mode, ZEW3003 associates with another AP within its range. The device behaves like a wireless network adapter.

Figure below shows the Client mode ZEW3003 as a wireless client in infrastructure mode. Connect the LAN port of the ZEW3003 with Ethernet interface of the wired network.

13

Image 15
Contents Page Copyright Statement Table of Contents Welcome FeaturesPackage Contents IntroductionPanel Layout Front Panel Hardware InstallationInstallation Environment Requirements Rear PanelSystem Requirements Hardware Connection TCP/IP Address Setting Configure your computerSelect Internet Protocol TCP/IP and click Properties Log Configure your ZEW3003Status Statistics StatusDhcp Info LAN Setup 4.3.1 LAN SetupRadio 1 AP Client 3 WDS 4 AP+WDS Repeater Security None2 WEP 3 802.1X Enterprise WPA Enterprise WPA Personal7 WPA2 Enterprise 6 WPA2 Personal9 WPA&WPA2 Enterprise 8 WPA&WPA2 PersonalMAC Filter WDSClient Info Site SurveyAdvanced Misc Troubleshooting