Zonet Technology ZEW3003 manual 3 802.1X Enterprise

Page 20

￿Key1, 2, 3, 4: Input WEP key characters here, the number of characters must be the same as the number displayed at WEP Mode. You must enter at least one encryption key here, and if you entered multiple WEP keys, they should not be same with each other.

4.5.3 802.1X Enterprise

This security mode is used when a RADIUS server is connected to ZEW3003. IEEE 802.1x is an authentication protocol. Every user must use a valid account to login to ZEW3003 before accessing the wireless LAN. The authentication is processed by a RADIUS server. This mode only authenticates user by IEEE 802.1x, but it does not encryption the data during communication.

￿Radius Server IP: Input the IP address of Radius server here.

￿Radius Port: Input the port number of the Radius server here. Default value is 1812.

￿Radius Password: Input the password of Radius server here.

￿WEP: Select enable 64 bit WEP, 128 bit WEP or Disable WEP encryption which indicates the authentication process between wireless adapter and ZEW3003.

18

Image 20
Contents Page Copyright Statement Table of Contents Features Package ContentsIntroduction WelcomeHardware Installation Panel Layout Front PanelSystem Requirements Installation Environment RequirementsRear Panel Hardware Connection Configure your computer TCP/IP Address SettingSelect Internet Protocol TCP/IP and click Properties Configure your ZEW3003 LogStatus Status StatisticsLAN Setup 4.3.1 LAN Setup Dhcp InfoRadio 1 AP Client 3 WDS 4 AP+WDS Repeater 2 WEP SecurityNone 3 802.1X Enterprise WPA Personal WPA Enterprise6 WPA2 Personal 7 WPA2 Enterprise8 WPA&WPA2 Personal 9 WPA&WPA2 EnterpriseWDS MAC FilterSite Survey Client InfoAdvanced Misc Troubleshooting