Zonet Technology ZEW3003 manual WPA Personal, WPA Enterprise

Page 21

4.5.4 WPA Personal

Wi-Fi Protected Access (WPA) is an advanced security standard. It uses TKIP and AES to change the encryption key frequently.

￿Accessorial Authentication & Encryption: Default setting is TKIP.

￿Key: Enter the key which must have 8-63 ASCII characters.

4.5.5 WPA Enterprise

This security mode is used when a RADIUS server is connected to ZEW3003.

￿Accessorial Authentication & Encryption: Default setting is TKIP.

￿Radius Server IP: Input the IP address of Radius server here.

￿Radius Port: Input the port number of the Radius server here. Default value is 1812.

￿Radius Password: Input the password of Radius server here.

19

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Page Copyright Statement Table of Contents Package Contents FeaturesIntroduction WelcomePanel Layout Front Panel Hardware InstallationInstallation Environment Requirements Rear PanelSystem Requirements Hardware Connection TCP/IP Address Setting Configure your computerSelect Internet Protocol TCP/IP and click Properties Log Configure your ZEW3003Status Statistics StatusDhcp Info LAN Setup 4.3.1 LAN SetupRadio 1 AP Client 3 WDS 4 AP+WDS Repeater Security None2 WEP 3 802.1X Enterprise WPA Enterprise WPA Personal7 WPA2 Enterprise 6 WPA2 Personal9 WPA&WPA2 Enterprise 8 WPA&WPA2 PersonalMAC Filter WDSClient Info Site SurveyAdvanced Misc Troubleshooting
Top Page Image Contents