Zonet Technology ZEW3003 manual Wds, MAC Filter

Page 24

4.6 WDS

Wireless Distribution System uses wireless media to communicate with other access points, like the Ethernet does. To do this, you must set these access points in the same channel and set the MAC address of other access points you want to communicate with in the table.

Note: You need to configure WDS setting when selecting AP or AP+WDS radio mode.

￿Wireless Bridge MAC: Input the MAC address of another access point.

￿Description: The description of wireless bridge.

￿Current Wireless Bridge Information: The added MAC addresses are listed here.

4.7 MAC Filter

￿Enable Wireless Access Control: Enable it to select one button to Permit or Deny the wireless connection from MAC address list.

￿MAC: To specify an external IP address, please add the MAC address manually and click Add.

￿Description: The description of this setting.

￿MAC Address List: The added MAC addresses are listed here. Click Delete to delete the filter management for this MAC address.

22

Image 24
Contents Page Copyright Statement Table of Contents Features Package ContentsIntroduction WelcomeHardware Installation Panel Layout Front PanelInstallation Environment Requirements Rear PanelSystem Requirements Hardware Connection Configure your computer TCP/IP Address SettingSelect Internet Protocol TCP/IP and click Properties Configure your ZEW3003 LogStatus Status StatisticsLAN Setup 4.3.1 LAN Setup Dhcp InfoRadio 1 AP Client 3 WDS 4 AP+WDS Repeater Security None2 WEP 3 802.1X Enterprise WPA Personal WPA Enterprise6 WPA2 Personal 7 WPA2 Enterprise8 WPA&WPA2 Personal 9 WPA&WPA2 EnterpriseWDS MAC FilterSite Survey Client InfoAdvanced Misc Troubleshooting