Zonet Technology ZEW3003 manual 4 AP+WDS

Page 17

4.4.4 AP+WDS

In AP+WDS mode, ZEW3003 will work both in AP mode and WDS mode. It supports the wireless bridge between the two wired networks; the connection of wireless network is also supported at the same time. The part of AP's encryption in accordance with the encryption of AP mode. The part of WDS' encryption in accordance with the encryption of WDS mode.

Note: Steps to configured AP+WDS mode:

1.Configured AP mode parameters.

2.Configured WDS mode parameters.

3.Enabled AP+WDS mode.

15

Image 17
Contents Page Copyright Statement Table of Contents Package Contents FeaturesIntroduction WelcomePanel Layout Front Panel Hardware InstallationSystem Requirements Installation Environment RequirementsRear Panel Hardware Connection TCP/IP Address Setting Configure your computerSelect Internet Protocol TCP/IP and click Properties Log Configure your ZEW3003Status Statistics StatusDhcp Info LAN Setup 4.3.1 LAN SetupRadio 1 AP Client 3 WDS 4 AP+WDS Repeater 2 WEP SecurityNone 3 802.1X Enterprise WPA Enterprise WPA Personal7 WPA2 Enterprise 6 WPA2 Personal9 WPA&WPA2 Enterprise 8 WPA&WPA2 PersonalMAC Filter WDSClient Info Site SurveyAdvanced Misc Troubleshooting