Zonet Technology ZEW3003 manual 3 WDS

Page 16

4.4.3 WDS

In WDS mode, two ZEW3003 in two remote locations connect with each other to provide a wireless bridge between 2 wired networks. The two ZEW3003 operating in WDS mode do not allow client associations. It is mostly used by enterprise to connect 2 remote office’s network together.

Note: WDS mode only can be enabled on two or more ZEW3003 networking environment.

Image 16

Contents Page Copyright Statement Table of Contents Features Package ContentsIntroduction WelcomeHardware Installation Panel Layout Front PanelRear Panel Installation Environment RequirementsSystem Requirements Hardware Connection Configure your computer TCP/IP Address SettingSelect Internet Protocol TCP/IP and click Properties Configure your ZEW3003 LogStatus Status StatisticsLAN Setup 4.3.1 LAN Setup Dhcp InfoRadio 1 AP Client 3 WDS 4 AP+WDS Repeater None Security2 WEP 3 802.1X Enterprise WPA Personal WPA Enterprise6 WPA2 Personal 7 WPA2 Enterprise8 WPA&WPA2 Personal 9 WPA&WPA2 EnterpriseWDS MAC FilterSite Survey Client InfoAdvanced Misc Troubleshooting