Zonet Technology ZEW3003 manual 8 WPA&WPA2 Personal, 9 WPA&WPA2 Enterprise

Page 23

4.5.8 WPA&WPA2 Personal

￿Pre-Shared Key: For WPA, default setting is TKIP; for WPA2, default setting is AES.

￿Key: Enter the key which must have 8-63 ASCII characters.

4.5.9 WPA&WPA2 Enterprise

This security mode is used when a RADIUS server is connected to ZEW3003.

￿Pre-Shared Key: For WPA, default setting is TKIP; for WPA2, default setting is AES.

￿Radius Server IP: Input the IP address of Radius server here.

￿Radius Port: Input the port number of the Radius server here. Default value is 1812.

￿Radius Password: Input the password of Radius server here.

21

Image 23
Contents Page Copyright Statement Table of Contents Welcome FeaturesPackage Contents IntroductionPanel Layout Front Panel Hardware InstallationSystem Requirements Installation Environment RequirementsRear Panel Hardware Connection TCP/IP Address Setting Configure your computerSelect Internet Protocol TCP/IP and click Properties Log Configure your ZEW3003Status Statistics StatusDhcp Info LAN Setup 4.3.1 LAN SetupRadio 1 AP Client 3 WDS 4 AP+WDS Repeater 2 WEP SecurityNone 3 802.1X Enterprise WPA Enterprise WPA Personal7 WPA2 Enterprise 6 WPA2 Personal9 WPA&WPA2 Enterprise 8 WPA&WPA2 PersonalMAC Filter WDSClient Info Site SurveyAdvanced Misc Troubleshooting