Downloading a Configuration File
Downloading a Configuration File
The IntraStack’s configuration file can be downloaded to the device via IntraSpection.
To download a configuration file:
1 Make sure the IntraStack is configured with valid boot information.
2
3
4
5
6
7
See “Set up the Boot Information” on page
Click swAgentSW.
The Switch Agent Software Group table appears.
Open the Up/Download Action
Open the Download File
Type the server’s IP address where the configuration file resides in the Config Server field.
Type the name of the configuration file in the Config File Name field.
Type the number of attempts the IntraStack will make to download the file in the Config Retries field.
8 Open the Active Image Bank
ΔNote: The IntraStack 6014DSB has two image areas (or “banks”) where its runtime software is stored:
❏Active Image Bank — the bank that is used during the system
❏Download Bank — the bank that receives the new file when it is downloaded (also referred to as “Destination Bank”).
Page